I bought this Isaac Hollis 8 Bore Big game rifle - no clue what to load

Great idea! Always tried to think of ways of building up the front sight without affecting the originality of the rifle. Will be interesting to see how flat that ball actually shoots.
 
According to LoadBook trajectory tables ........

25 yards = +3.10" = 1518 ft/lbs ME
50 yards = +5.06" = 1479 ft/lbs ME
75 yards = +4.31" = 1445 ft/lbs ME
105 yards = +0.25" = 1405 ft/lbs ME
125 yards = -5.58" = 1370 ft/lbs ME
 
Last edited:
Impressive. Not a lot of velocity but tons of momentum looking at those ME values.
 
That is a slick way of getting a bit more height from a front sight

In a big round ball or conical wonder what the Tko numbers are:A Bulb:
 
Today I also added a pin to keep the wedge captive in the stock so it won't get lost. Next trip to the range will test the increased height of the front site.
 
Well, back from the range. With the front site raised, and a slight increase in powder, here is the result.

0 yards = +0.00" = 1795 ft/lbs ME
25 yards = +3.50" = 1748 ft/lbs ME
50 yards = +6.30" = 1682 ft/lbs ME
75 yards = +6.60" = 1632 ft/lbs ME
100 yards = +4.60" = 1585 ft/lbs ME
125 yards = +0.00" = 1541 ft/lbs ME
150 yards = -7.60" = 1500 ft/lbs ME

http://www.buckstix.com/buckpics/8bore-targ-1.jpg

8bore-targ-1.jpg
 
Last edited by a moderator:
Throw a roll of quarters in there for home defense!
 

Forum statistics

Threads
63,341
Messages
1,393,388
Members
123,738
Latest member
Tigger
 

 

 

Latest posts

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top