Thoughts on this 375 H&H?

[Flanders357]

I'm new to the world of the .375 H&H and have a strong affection for Winchester Model 70 rifles, especially the pre-64 models. I've been hunting with a suppressor for years, and I can't imagine shooting or hunting without one. However, I find the idea of threading the barrel of a Model 70 in .375 H&H for a suppressor to be rather unappealing, as it doesn't seem fitting for those rifles.

Recently, I came across a Mauser DWM 1909 in .375 H&H and I'm looking for feedback and thoughts on it. It is already threaded and Since I know very little about Mausers or the .375 H&H cartridge, any insights you can provide would be greatly appreciated. Is it a good firearm? Is the price reasonable? Thank you in advance!

Link to rifle: https://www.gunsinternational.com/guns-for-sale-online/rifles/dwm-rifles/.cfm?gun_id=103292038

 

[RSL]

The lack of iron sights would nix it for me. I guess it depends on your intended use to some extent.

FWIW, I have a 1998 M70 Classic Super Express in 375 H&H that was threaded when I bought it recently. Does not concern me at all. But, then again, it's not a Pre64 either.

 

[dchum]

I would pass

 

[uplander01]

There are better options out there.

 

[mooze]

this is a military 98 action, original is standard length ( cut-out for loading strips on the left). It will have major modifications/lengthening of the action to fit a 375H&H, it was made for 8x57IS. Whether this is any good depends on the metallurgic skills of the gunsmith/welder. Also the action metal then needs to be quenched and tempered after welding.
This may or may not have been done well, impossible to judge from remote.
Buyer beware
I think there are better options for a 375 nowadays.

 

[Flanders357]

Thank you all, thats what i needed to know!

 

[Flanders357]

There are better options out there.

If you have Any suggestions on makes and models, id welcome that. Would like to keep it under $3k and closer to the $2k and under range if possible...

 

[Flanders357]

The lack of iron sights would nix it for me. I guess it depends on your intended use to some extent.

FWIW, I have a 1998 M70 Classic Super Express in 375 H&H that was threaded when I bought it recently. Does not concern me at all. But, then again, it's not a Pre64 either.

Do you run a suppressor on it?

 

[Flipper Dude]

That’s funny. I can’t imagine shooting or hunting with a suppressor. Not in this lifetime.

 

[Rafiki]

Butt ugly.

 

[Flanders357]

That’s funny. I can’t imagine shooting or hunting with a suppressor. Not in this lifetime.

Haha, I hear you! I was in the same boat, and now I have four suppressors! It's amazing how different it is to be around suppressed firearms compared to unsuppressed ones. They’re also really helpful for protecting kids' ears, so I don't have to worry as much about hearing protection.

 

[illini]

Get a new FN model 70 375 H&H and raw dog it.

 

[Red Leg]

I have suppressors on two AR platforms - one to repel boarders here on the ranch and one for dealing with pigs in the pecans and the corn with a thermal. I also have one of my R8's set up with one in 6.5x55 for backyard deer. But I can not imagine using one on dangerous game. If a full size rifle, it turns a great hunting firearm into a surf rod. I also want quick access to my iron sights for a follow-up in the thick stuff. A suppressor makes that impossible. No thanks.

 

[mdwest]

Similar situation here…

I’ve got a pair of AR10’s set up with suppressors and thermals that my wife and I use for pig population control… and I started using a suppressor on my primary “deer” 308 bolt action a few seasons ago… shooting out a blind window from a rest negates the wonky balance created by attaching an extra pound out 6” in front of the muzzle..

And after the $200 tax stamp goes away in January I’ll probably buy a few more… I wouldn’t mind adding a can to a Ruger 10/22 that gets used for raccoons and other smaller corn thieves.. and my wife is now wanting a dedicated can for her 308 bolt gun (primary deer rifle)… and it’s probably a good idea to consider adding one to my little 10” barreled AR pistol that is set up for home defense…

I’m a big fan of suppressors…

But I’ve got no interest at all in adding one to any of my DG rifles..

 

[Flanders357]

I have suppressors on two AR platforms - one to repel boarders here on the ranch and one for dealing with pigs in the pecans and the corn with a thermal. I also have one of my R8's set up with one in 6.5x55 for backyard deer. But I can not imagine using one on dangerous game. If a full size rifle, it turns a great hunting firearm into a surf rod. I also want quick access to my iron sights for a follow-up in the thick stuff. A suppressor makes that impossible. No thanks.

How are you getting quick follow up shots with iron sights? Pivot mounts?

 

[Flanders357]

Similar situation here…

I’ve got a pair of AR10’s set up with suppressors and thermals that my wife and I use for pig population control… and I started using a suppressor on my primary “deer” 308 bolt action a few seasons ago… shooting out a blind window from a rest negates the wonky balance created by attaching an extra pound out 6” in front of the muzzle..

And after the $200 tax stamp goes away in January I’ll probably buy a few more… I wouldn’t mind adding a can to a Ruger 10/22 that gets used for raccoons and other smaller corn thieves.. and my wife is now wanting a dedicated can for her 308 bolt gun (primary deer rifle)… and it’s probably a good idea to consider adding one to my little 10” barreled AR pistol that is set up for home defense…

I’m a big fan of suppressors…

But I’ve got no interest at all in adding one to any of my DG rifles..

Yeah the more I’m digging into this, I may just go classic and find a Mod70 or CZ 550

 

[coreydb]

Don't worry about the aesthetics; its a can. If you don't want it on your kit, wear ear protectors. I use a can on the rifles that have the threaded ends and wear ear protectors for the rest. It's all for function.

 

[Mtn_Infantry]

How are you getting quick follow up shots with iron sights? Pivot mounts?

Pivot mounts or QD rings from Talley would be the best option when removing a scope to use fixed irons. @Red Leg point was that with a suppressor he can’t see his irons and most rifle manufacturers don’t make suppressor height irons, so he prefers to not run a can except on a couple dedicated rifles. If you follow/look art his posts, you’ll notice that his firearms collection and preferred rifles typically make a Pre64 M70 look like it still has milk on its lips.

I’ve seen some 375 and larger rifles in South Africa belonging to PH’s outfitted with suppressor, but they typically have a fraction of the dangerous game experience compared to PH’s in other countries.

I run suppressors on a bunch of different guns from AR’s to Pistols, to Rimfire Rifles, dedicated Long Range Rifles and some of my Hunting Rifles. I think they’re great and anyone who doesn’t have one, hasn’t shot with one enough. I’ve thought about chopping a 375 to 18-20” and putting a can on it but haven’t been able to bring myself to do it. SWS makes an integrally suppressed 375 which has also tempted me a time or two but I haven’t been able to justify to myself. When I hunt in Africa, part of the experience is the rifle and the nostalgia of it. Put me in a stack or a hunt here in North America and there’s a good chance I’ve got a can on my rifle.

 

[RSL]

Do you run a suppressor on it?

No, I do not. I have a Gentry brake for it but have not tried it yet. I am hopeful I can shoot it without training wheels though.

 

[RedTag]

I'm new to the world of the .375 H&H and have a strong affection for Winchester Model 70 rifles, especially the pre-64 models. I've been hunting with a suppressor for years, and I can't imagine shooting or hunting without one. However, I find the idea of threading the barrel of a Model 70 in .375 H&H for a suppressor to be rather unappealing, as it doesn't seem fitting for those rifles.

Recently, I came across a Mauser DWM 1909 in .375 H&H and I'm looking for feedback and thoughts on it. It is already threaded and Since I know very little about Mausers or the .375 H&H cartridge, any insights you can provide would be greatly appreciated. Is it a good firearm? Is the price reasonable? Thank you in advance!

Link to rifle: https://www.gunsinternational.com/guns-for-sale-online/rifles/dwm-rifles/.cfm?gun_id=103292038

This looks like it’s being sold by Cabelas, and for starters the asking price is at least 50% higher than it should be. The scope is worthless. The stock is kind of cute but nothing special. The barrel is made into Swiss cheese (no bueno) and there are no iron sights. I’d pass on that personally. There is really so much to inspecting a used rifle anyway I strongly prefer to buy in person unless it was something truly special and there was no other option.