on a lighter note...

You really have to look closely at this but 3 is right
 
Thankfully, we got that solved.
 
7 has a hole at the bottom.
 
From an engineering standpoint they will all fill at the same time. We must assume they are completely empty meaning under a perfect vacuum. The water drop would then evaporate before it hit the first bucket. Because they all have an open top the now gaseous water would spread evenly between then maybe all. They are all now full with a low pressure gas. So it’s a tie.
 
IMG_2892.JPG
 
From an engineering standpoint they will all fill at the same time. We must assume they are completely empty meaning under a perfect vacuum. The water drop would then evaporate before it hit the first bucket. Because they all have an open top the now gaseous water would spread evenly between then maybe all. They are all now full with a low pressure gas. So it’s a tie.
And now my mind hurts again!

You must be a realist: the glass is always totally full of something!
 
From an engineering standpoint they will all fill at the same time. We must assume they are completely empty meaning under a perfect vacuum. The water drop would then evaporate before it hit the first bucket. Because they all have an open top the now gaseous water would spread evenly between then maybe all. They are all now full with a low pressure gas. So it’s a tie.

This engineer does not agree with your assumption. (n)

upload_2019-2-24_5-42-34.png
 

Forum statistics

Threads
68,662
Messages
1,527,766
Members
155,894
Latest member
AdriannaN2
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top