on a lighter note...

Screenshot_20230304_214421_Instagram.jpg
 

Knew a bloke who fought at Kokoda - the Owen guns apparently made a distinct 'click' when the last round of a magazine was fired. The Japs worked this out and sought to exploit the empty magazine. The developed counter measure was to have a mate waiting nearby with a second Owen, mag fully loaded.
 
This is a driveline or transmission brake. In the four wheel drive community they are sometimes used as a backup or emergency brake. The reason for being mounted here is if their other brakes fail because a wheel came off taking the hydraulic fluid with it. These braking systems use a hydraulic system (separate from normal braking) calipers or cable with either actuated via pedal or lever. For safety, a cable is preferred.

This is not the best installation, because it is what's called a "pinion brake" being located near the pinion gear. Typically it would be mounted on the outlet side of the transmission to keep it from getting bashed up, however it takes much more skill to do so because clearances to other objects (like the transmission tunnel of the cab) are much tighter in that area. It requires more work, but will result in a better overall installation.
 
Last edited:
1678031727887.png
 

Forum statistics

Threads
61,521
Messages
1,347,256
Members
115,964
Latest member
AgustinFal
 

 

 

Latest profile posts

2RECON wrote on Riflecrank's profile.
Hallo Ron, do you remember me? I´m Michael from Germany. We did some Wildcats on the .338 Lapua Case.
.375 i did, and a .500 and .510 you did.
Can you please contact me again (eMail please)

Best
Michael
 
Top