Mauser 9.3x62 caliber rifle re-loading

Gert Odendaal

AH legend
Joined
Apr 19, 2012
Messages
3,013
Reaction score
3,870
Media
901
Articles
1
Hunting reports
Africa
2
Member of
SAJW
Good day members. I am fortunate to have received my Mauser 9.3x62 caliber hunting rifle. I commenced re-loading the first loads. Aim of these loads is to fire-form into my Mauser `s chamber.
Re-loading Data :
Propellant: S 335
Bullet : 250 gn VRG 5 ( old generation Peregrine bullets )
Primer: Remington 91/2 Magnum rifle
Load gn : 52 gn S335
OAL : 83mm ( OAL in book was changed due to smaller magazine box)

Untitled.jpeg
Untitled6666.jpeg
Untitled66554432.jpeg
Untitledlll.jpeg
Untitlednnnnn.jpeg
Untitledmmmmmmmnnnn.jpeg
 
What a great job they did and very good to see Italian smiths, that are often associated more with guns, or doubles than magazine rifles, turning out such fine work.

Are you planning to keep it as iron sights only - in some ways, it would be a shame to drill and tap that pristine action.
 
What a great job they did and very good to see Italian smiths, that are often associated more with guns, or doubles than magazine rifles, turning out such fine work.

Are you planning to keep it as iron sights only - in some ways, it would be a shame to drill and tap that pristine action.
Yes, no rifle scope on this rifle , it is build as a dedicated walk/stalk short distance hunting in bush-veld areas of South African Limpopo regions..
 
I have cycled all the loaded rounds through the receiver, it cycles flawlessly, extracting positively , as smooth as my SAKO .300 as well as my Westley Richards 404 Jeffery rifle.This really is a superb rifle , incredible craftsmanship. The attention to detail is just incredible ....
 
Nice looking rifle. Everything a rifle needs and nothing extra.
 
Beautiful rifle!
 
Wonderful custom rifle. Perfect Limpopo stalking rifle.

Plains game and cape buffalo covered very nicely with one fine rifle.

Send us pictures of your hunts.
 
Congratulations Gert, that's a fine looking rifle and I bet it will shoot as good as it looks!
 
Joe, thank you kindly , yes, it shoots as beautifully as it looks..I took it to the shooting range for the first time ever shooting a 9.3x62 caliber..it is extremely accurate at 100 meters from standing position..free hand..

I tried three different shooting sticks Saturday but struggle with it..so I opt to shoot off hand..and shot a great grouping open sights.. two shots at the rear part of the warthog body was the struggle with the shooting sticks...

I am building myself shooting sticks..I believe shooting sticks is a personal item, build to your specifications and body...this rifle is unbelievable soft to handle and fast pointing acquiring a target when it is pointing to the target..
Untitled.jpeg
 
I spend a while re-loading for the 9.3x62..here are some photos :I changed the OAL to 83mm since the cases filled up in such a way that the bullet was press down quite a bit to get to 83mm , just to fit into the magazine ...
I am considering other propellant to fill the cases little bit less...I now need to shoot these loads over a chronograph..
Untitled.jpeg
Untitled6666.jpeg
Untitled66554432.jpeg
Untitledmmmmmmmnnnn.jpeg
Untitlednnnnn.jpeg
 

Forum statistics

Threads
64,656
Messages
1,423,853
Members
131,662
Latest member
1419514826
 

 

 

Latest profile posts

cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top