First .375 on the way!

Congrats on the 375.
Let us know how it shoots.

A lot of folks start with a 300RUM as a donor for a 404J build.
Depends on the type of action you want...CRF vs PF.
I'll duck for cover now.

A Left Hand 300 RUM (or any of the RUMs) would make the ideal donor rifle to convert into a 404J. There's a few listed on GB, all are Remington 700 PF. If Montana Rifle survives, they make LH rifles and recently came out with a 404J, so that might be your best option for a not to expensive CRF.
 
I've got a canoe in bear trip planned for this fall, if it works out I plan to invite friends from here to go on future adventures into the Tobeatic, @Bob Nelson 35Whelen has first dibs

The Tobeatic is a beautiful place, I can’t wait to read the report! After all this crap is over and we can grab a beer, remind me to tell you the story of my flawed decision to paddle the gold river! Holy crap that’s a lot of waterfalls!
 
@Skinnersblade all I can say is I love my 375HH Win model 70 which i purchased 2 years ago. It’s a beautiful rifle to shoot and is ready to go to Zimbabwe if we can get this dang virus under control. I love it so much I went ahead and have a 404J being built from a Winchester 375HH action. Hopefully have it any day. Some day I’ll head up your way for a bear but trying to get a few trips to Africa first.
 
A Left Hand 300 RUM (or any of the RUMs) would make the ideal donor rifle to convert into a 404J. There's a few listed on GB, all are Remington 700 PF. If Montana Rifle survives, they make LH rifles and recently came out with a 404J, so that might be your best option for a not to expensive CRF.
For a new 404J...

If you did go with MRC, I wouldn't count on future factory support.
They've been more than just a little shaky as of late.
The C19 may put the nail in them, but I wouldn't count them out just yet.

Another option would be Hill Country Rifles for a CRF option.
They are more expensive, but you will get what you pay for.

Lastly, I'll be waiting for the eye rolls and groans, there is Blaser.
Although it is a PF action, it is of the finest quality and highly reliable.
 
For a new 404J...

If you did go with MRC, I wouldn't count on future factory support.
They've been more than just a little shaky as of late.
The C19 may put the nail in them, but I wouldn't count them out just yet.

Another option would be Hill Country Rifles for a CRF option.
They are more expensive, but you will get what you pay for.
...

If you are going to go custom route there is also Defiance Machine actions, can be ordered with CRF and 3 position safety. I have one on order for a .300 RUM build.

https://defiancemachine.com/actions/deviant/deviant-hunter/
 

Attachments

  • Screen Shot 2020-04-08 at 2.38.12 PM.png
    Screen Shot 2020-04-08 at 2.38.12 PM.png
    816.7 KB · Views: 77
  • Screen Shot 2020-04-08 at 2.38.13 PM.png
    Screen Shot 2020-04-08 at 2.38.13 PM.png
    527.6 KB · Views: 77
For a new 404J...

If you did go with MRC, I wouldn't count on future factory support.
They've been more than just a little shaky as of late.
The C19 may put the nail in them, but I wouldn't count them out just yet.

Another option would be Hill Country Rifles for a CRF option.
They are more expensive, but you will get what you pay for.

Lastly, I'll be waiting for the eye rolls and groans, there is Blaser.
Although it is a PF action, it is of the finest quality and highly reliable.

You will have a hard sell on a blazer in Canada or atleast eastern Canada I think we were all weaned on horror stories of the Ross rifle. I mean a cousins friends grandfather hated his during the war so they must be terrible.
 
You will have a hard sell on a blazer in Canada or atleast eastern Canada I think we were all weaned on horror stories of the Ross rifle. I mean a cousins friends grandfather hated his during the war so they must be terrible.
Ha!
 
Congratulations on your. 375. My step up to the big bores was my 416 Rigby. Still trying to figure out how to convince my Sweetheart that I need a .375 H&H.
Explain to her that it's "her" rifle.
Things will go much more smoothly.
Especially seeing as you already have 416RIGBY.

Worst case scenario, you both go hunting buffalo.
I don't see a downside to that.
 
For a new 404J...

If you did go with MRC, I wouldn't count on future factory support.
They've been more than just a little shaky as of late.
The C19 may put the nail in them, but I wouldn't count them out just yet.

Another option would be Hill Country Rifles for a CRF option.
They are more expensive, but you will get what you pay for.

Lastly, I'll be waiting for the eye rolls and groans, there is Blaser.
Although it is a PF action, it is of the finest quality and highly reliable.

No eye rolls from this guy about the Blaser. I bought a Sako Safari in a .375. Beautiful gun. Shoots well. But I can’t take the barrel off of it and drop a .22 Lr barrel on and go squirrel hunting in the back yard.
 
Well gents as of today I've joined the ranks of fellow big bore addicts on this forum. I blame gateway calibers such as .340 weatherby and .45-70 for leading me astray.

In about a weeks time I will have a .375 h&h zastava lh.

Out of curiosity do I just start looking for an action to build a .404 on now or wait a bit....
What about looking for another Zastava lh, preferably identical to the one you just purchased then having it converted to .404J, rebarrel, etc. They say beware of the man that shoots one rifle. This might be the next best thing. The action should be long enough.
 
I have a poor mans blaser. A TC encore I can go from 22-250 to 25-06 in a few minutes and each barrel has its own scope.
The follow up shot may be a bit slower though.
Hell, you can go up to 300WM with 26 or 28" barrel and still get it done quickly.
Make that first shot count and you won't have to worry about a follow up. ;)
 
I have a poor mans blaser. A TC encore I can go from 22-250 to 25-06 in a few minutes and each barrel has its own scope.
The follow up shot may be a bit slower though.

I used a single shot Henry with much success for several years until regrettably selling it to purchase a .340 lh. I've not handled an encore but if they are anything like my Henry was they're wonderful to carry and deadly.
 
I love the 375 h&H, I have used it here in Newfoundland on moose certainly dont need it for moose but love using it. I find absolutely no difference with 'moose hunting with the 375 H&H compared with the 30/06 except for the weight of the rifle. Recoil is a non issue. It has however whetted my desire to shoot big bore rifles. I am constantly looking at the larger stuff. I have decided that I will hunt Africa first though. You only live once. I am putting away money for Africa and when I come back will look at maybe a 404 Jeffrey or something bigger. The way i see it though is since I own a 375 H & H maybe my next will be a stopper . I will never own a double rifle but thats where I see all this headed
 
I love the 375 h&H, I have used it here in Newfoundland on moose certainly dont need it for moose but love using it. I find absolutely no difference with 'moose hunting with the 375 H&H compared with the 30/06 except for the weight of the rifle. Recoil is a non issue. It has however whetted my desire to shoot big bore rifles. I am constantly looking at the larger stuff. I have decided that I will hunt Africa first though. You only live once. I am putting away money for Africa and when I come back will look at maybe a 404 Jeffrey or something bigger. The way i see it though is since I own a 375 H & H maybe my next will be a stopper . I will never own a double rifle but thats where I see all this headed

I actually just priced a hunt on the rock any experience with gander river outfitters?
Our moose is on a lottery and I can't seem to get drawn. I try not to let "need" influence my decisions with regards to guns. I find "want" and I get along much better in that regard.
 

Forum statistics

Threads
54,180
Messages
1,147,945
Members
93,731
Latest member
JosefaShro
 

 

 

Latest profile posts

sgtsabai wrote on Tanks's profile.
Business is the only way to fly. I'm headed to SA August 25. I'm hoping that business isn't an arm and a leg. If you don't mind, what airline and the cost for your trip. Mine will be convoluted. I'll be flying into the states to pick up my 416 Rigby as Thailand doesn't allow firearms (pay no attention to the daily shootings and killings) so I'll have 2 very long trips.
Vonfergus wrote on JamesJ's profile.
I am interested in the Double
Nick BOWKER HUNTING SOUTH AFRICA wrote on EGS-HQ's profile.
Hi EGS

I read your thread with interest. Would you mind sending me that PDF? May I put it on my website?

Rob
85lc wrote on Douglas Johnson's profile.
Please send a list of books and prices.
 
Top