on a lighter note...

Gunsmithing for the first time.....or trying to assist the shooter next to you at the range who just jammed 2 rounds into his new AR15 while trying to clear a malfunction caused by not having the buffer assembly properly secured behind the detent post.

Don't ask me how he did it. It's a great mystery. The result was I popped out the rear pin to break open the upper receiver and the buffer and buffer spring went about 4 and 6 feet respectively past the shooters' table.[the range uses 3 feet wide by 6 feet long picnic tables for shooter's benches].
I've found out that the spring from any "click" type pin works very well as a substitute under the detent post.
 
Gunsmithing for the first time.....or trying to assist the shooter next to you at the range who just jammed 2 rounds into his new AR15 while trying to clear a malfunction caused by not having the buffer assembly properly secured behind the detent post.

Don't ask me how he did it. It's a great mystery. The result was I popped out the rear pin to break open the upper receiver and the buffer and buffer spring went about 4 and 6 feet respectively past the shooters' table.[the range uses 3 feet wide by 6 feet long picnic tables for shooter's benches].
The magazine spring for most pump and auto shotguns have a knack for going airborne when replacing them after a thorough cleaning. I would venture to say there isn't an expert gunsmith anywhere in the world that hasn't had those springs get away at least a dozen times. Seems it requires one man + an ambidextrous midget wizard to compress the spring while replacing the compression fit retaining cap inside the end of the magazine tube. Do NOT stand in the line of fire! Those springs pack a wallop. Ask me how I know!
 
IMG_4596.png
 
We had two guys at the club, cousins. One of them had a five-charge, like a Browning Auto. It was an object of envy, few people had anything other than a double-barrelled shotgun. He was the "soul of the company" himself, telling a lot of funny stories, for which, by the way, he himself was often the reason. And so one day, shortly after the duck hunt opened, in September, we were already going home, setting up camp, loading junk into cars. They cleaned their weapons. I was sitting by the lake, admiring the scenery. Suddenly, a metallic clang came from behind, "Bank!" and a five-shot barrel flies over me along a mortar trajectory, and falls into the lake. I must say, in such situations it often turns out who the real friend is. There were no such people among us, and the author of the performance climbed into the lake himself, and it was quite cold.
The guys, by the way, had a rare surname of Scotian-Gaelic origin:
 
We had two guys at the club, cousins. One of them had a five-charge, like a Browning Auto. It was an object of envy, few people had anything other than a double-barrelled shotgun. He was the "soul of the company" himself, telling a lot of funny stories, for which, by the way, he himself was often the reason. And so one day, shortly after the duck hunt opened, in September, we were already going home, setting up camp, loading junk into cars. They cleaned their weapons. I was sitting by the lake, admiring the scenery. Suddenly, a metallic clang came from behind, "Bank!" and a five-shot barrel flies over me along a mortar trajectory, and falls into the lake. I must say, in such situations it often turns out who the real friend is. There were no such people among us, and the author of the performance climbed into the lake himself, and it was quite cold.
The guys, by the way, had a rare surname of Scotian-Gaelic origin:
Could not have been a Browning A5. In order for the barrel to be launched off the gun would require removing the magazine cap. If the cap is even loosened, the hammer is blocked. Must have been a gas operated gun.

Read your bio. Very interesting. Hope you can get out of the country to hunt someday.
 
Could not have been a Browning A5. In order for the barrel to be launched off the gun would require removing the magazine cap. If the cap is even loosened, the hammer is blocked. Must have been a gas operated gun.

Read your bio. Very interesting. Hope you can get out of the country to hunt someday.
This is not a Browning Auto, but a "type". The gun is called "MC21-12", it has a movable barrel 75 cm long and a fairly powerful spring. I had one, but I changed it to a gas operated.
Yes, there are no special problems for a trip to Africa, except for one major one :). The main thing is, before I retired, there was such an opportunity - I just had to not buy a lot of guns, and I could save money on an inexpensive safari :)
 
Last edited:
The magazine spring for most pump and auto shotguns have a knack for going airborne when replacing them after a thorough cleaning. I would venture to say there isn't an expert gunsmith anywhere in the world that hasn't had those springs get away at least a dozen times. Seems it requires one man + an ambidextrous midget wizard to compress the spring while replacing the compression fit retaining cap inside the end of the magazine tube. Do NOT stand in the line of fire! Those springs pack a wallop. Ask me how I know!

Don't have to ask. Been there, Still do that. It pretty much comes with the territory on my 11-87 and 1100, when removing or inserting the magazine plugs.
 

Forum statistics

Threads
65,623
Messages
1,448,936
Members
137,079
Latest member
JJones
 

 

 

Latest posts

Latest profile posts

Timbila GAME LODGE wrote on Clayton d's profile.
Hi Clayton,

Please find attached our best quote based on your request.

I’ve also included the price list for additional animals, as well as our 2026 hunting packages for your reference.

You can also click on my banner to access our website and get more detailed information about the lodge, hunting areas, and options.

Best regards,
Orso
Woza it has been a busy few weeks!

Here below are the updated available dates for this the 2026 season

9-28 Feb open

21-25 March open

16-24 April is open

18-13 June is open this would awake time for kudu or Buffalo hunt!

9-19 July open will be very good for Kudu or Buffalo hunt!

14-30 September is open would be perfect time for late buffalo tracking hunt

October is wide open,

please contact me for more in
Woodcarver wrote on RAVEN ROCKS PRECISION's profile.
Just wanted to say thanks for the excellent customer service. Ordered some 9.3x62 brass and the delivery was a little short. An email through your website Contact Us link was replied to the next day with the tracking info for the correction. Good pricing coupled with great customer service will see returning customers every time. Thanks again!
No Promises wrote on swoobie's profile.
X5i scope is perfect - thanks for an easy transaction! Buy with confidence.
Made it to Augusta Georgia yesterday for a meeting, hunt bookings are looking good for 2026 and 2027, had a great time on our Alabama safari shot a rutting deer at 200 yards with 7mm PRC near Huntsville and then headed on to Butler Alabama and semi guided my first deer ever shot a very nice broken off 8 point with hunter there and spend a few days on 1100 acres hunting preserve awesome place!
 
Top