on a lighter note...

Gunsmithing for the first time.....or trying to assist the shooter next to you at the range who just jammed 2 rounds into his new AR15 while trying to clear a malfunction caused by not having the buffer assembly properly secured behind the detent post.

Don't ask me how he did it. It's a great mystery. The result was I popped out the rear pin to break open the upper receiver and the buffer and buffer spring went about 4 and 6 feet respectively past the shooters' table.[the range uses 3 feet wide by 6 feet long picnic tables for shooter's benches].
I've found out that the spring from any "click" type pin works very well as a substitute under the detent post.
 
Gunsmithing for the first time.....or trying to assist the shooter next to you at the range who just jammed 2 rounds into his new AR15 while trying to clear a malfunction caused by not having the buffer assembly properly secured behind the detent post.

Don't ask me how he did it. It's a great mystery. The result was I popped out the rear pin to break open the upper receiver and the buffer and buffer spring went about 4 and 6 feet respectively past the shooters' table.[the range uses 3 feet wide by 6 feet long picnic tables for shooter's benches].
The magazine spring for most pump and auto shotguns have a knack for going airborne when replacing them after a thorough cleaning. I would venture to say there isn't an expert gunsmith anywhere in the world that hasn't had those springs get away at least a dozen times. Seems it requires one man + an ambidextrous midget wizard to compress the spring while replacing the compression fit retaining cap inside the end of the magazine tube. Do NOT stand in the line of fire! Those springs pack a wallop. Ask me how I know!
 
IMG_4596.png
 
We had two guys at the club, cousins. One of them had a five-charge, like a Browning Auto. It was an object of envy, few people had anything other than a double-barrelled shotgun. He was the "soul of the company" himself, telling a lot of funny stories, for which, by the way, he himself was often the reason. And so one day, shortly after the duck hunt opened, in September, we were already going home, setting up camp, loading junk into cars. They cleaned their weapons. I was sitting by the lake, admiring the scenery. Suddenly, a metallic clang came from behind, "Bank!" and a five-shot barrel flies over me along a mortar trajectory, and falls into the lake. I must say, in such situations it often turns out who the real friend is. There were no such people among us, and the author of the performance climbed into the lake himself, and it was quite cold.
The guys, by the way, had a rare surname of Scotian-Gaelic origin:
 
We had two guys at the club, cousins. One of them had a five-charge, like a Browning Auto. It was an object of envy, few people had anything other than a double-barrelled shotgun. He was the "soul of the company" himself, telling a lot of funny stories, for which, by the way, he himself was often the reason. And so one day, shortly after the duck hunt opened, in September, we were already going home, setting up camp, loading junk into cars. They cleaned their weapons. I was sitting by the lake, admiring the scenery. Suddenly, a metallic clang came from behind, "Bank!" and a five-shot barrel flies over me along a mortar trajectory, and falls into the lake. I must say, in such situations it often turns out who the real friend is. There were no such people among us, and the author of the performance climbed into the lake himself, and it was quite cold.
The guys, by the way, had a rare surname of Scotian-Gaelic origin:
Could not have been a Browning A5. In order for the barrel to be launched off the gun would require removing the magazine cap. If the cap is even loosened, the hammer is blocked. Must have been a gas operated gun.

Read your bio. Very interesting. Hope you can get out of the country to hunt someday.
 
Could not have been a Browning A5. In order for the barrel to be launched off the gun would require removing the magazine cap. If the cap is even loosened, the hammer is blocked. Must have been a gas operated gun.

Read your bio. Very interesting. Hope you can get out of the country to hunt someday.
This is not a Browning Auto, but a "type". The gun is called "MC21-12", it has a movable barrel 75 cm long and a fairly powerful spring. I had one, but I changed it to a gas operated.
Yes, there are no special problems for a trip to Africa, except for one major one :). The main thing is, before I retired, there was such an opportunity - I just had to not buy a lot of guns, and I could save money on an inexpensive safari :)
 
Last edited:
The magazine spring for most pump and auto shotguns have a knack for going airborne when replacing them after a thorough cleaning. I would venture to say there isn't an expert gunsmith anywhere in the world that hasn't had those springs get away at least a dozen times. Seems it requires one man + an ambidextrous midget wizard to compress the spring while replacing the compression fit retaining cap inside the end of the magazine tube. Do NOT stand in the line of fire! Those springs pack a wallop. Ask me how I know!

Don't have to ask. Been there, Still do that. It pretty much comes with the territory on my 11-87 and 1100, when removing or inserting the magazine plugs.
 

Forum statistics

Threads
66,479
Messages
1,470,892
Members
140,967
Latest member
onew88com
 

 

 

Latest profile posts

Catchaser wrote on Philip Glass's profile.
Phillip I was reviewing some of the auctions online and saw your Nubian Ibex hunt coming up this weekend. It also showed you have Addax and Axis deer. Is there a website I can go to and see the lodge, cost of animals and what is available? Thanks Mark
Marcus bock wrote on sgt_zim's profile.
Appreciate your Limcroma/Franco comments. Will be seeing him in April....again. great person as well as his family (he has a new born son). I will always recommend him who makes a hunt special and exciting. Marc
James Friedrichs wrote on Nicaburns's profile.
I really like that knife you're selling. It looks so similar to my original 1306 that has been around a long time. I can't spend that much but if you get to a point where you'd entertain offers let me know. Thx, James
 
Top