Manton Double Rifle

DEFYET

AH member
Joined
May 7, 2015
Messages
45
Reaction score
113
Media
12
So today I gained a permit to break lockdown and took advantage of the situation to pick up my Manton 450/400 3 1/4" (NP for 60gr Cordite). Now to wait till I'm allowed out and shoot.

20201020_215830.jpg
20201020_160918.jpg
20201020_215849.jpg
 
Last edited by a moderator:
Congrats. A nitro-proofed hammer gun by that maker is a rare find. The Jones underlever is not the quickest reload, but it is the strongest locking action ever made. Assuming the bores are in good shape, you found a very special thing. If the previous owner can't help, be patient working up a load. I bet you will find one it shoots.

Where are you located that has those sorts of restrictions?
 
Congrats. A nitro-proofed hammer gun by that maker is a rare find. The Jones underlever is not the quickest reload, but it is the strongest locking action ever made. Assuming the bores are in good shape, you found a very special thing. If the previous owner can't help, be patient working up a load. I bet you will find one it shoots.

Where are you located that has those sorts of restrictions?
Thank you Red Leg.

The bores are in excellent condition and the barrel is shiny with strong rifling.

I'm in Victoria, Australia. We're currently experiencing some of the toughest Covid lockdown rules globally.
 
Yes you are. Not sure what Australia and New Zealand plan to do once international travel again picks up. :(

Hope you get to shoot it soon.
 
Congratulations on your find. I’m sure your salivating at the idea of shooting it.
 
Congratulations....looking forward to seeing the results of your first range day!
 
That is a fine old double and a good find for hammer nitro proofed rifle. Enjoy shooting and hunting with it.
 

Forum statistics

Threads
64,494
Messages
1,420,313
Members
130,681
Latest member
PhilNoguer
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top