Good Gun Deals This Week

Attachments

  • Screenshot 2023-08-15 at 3.19.50 PM.png
    Screenshot 2023-08-15 at 3.19.50 PM.png
    722.2 KB · Views: 131
Last edited by a moderator:
Good one.

My wife was being measured for a different stock on her model 70.

And saw the CZ
Totally worth the price of admission for $1400*. Original owner probably shot the first 5 rounds of that box and put it on consignment.

*Keep in mind, you might be taking on a project that requires some gunsmithing skills. If you are not capable of DIY, it could cost a significant amount of money.

Not surprising that your wife has and eye for deals. At least this time it was in a gun shop instead of the jewelry counter. ;)
 

Attachments

  • Screenshot 2023-08-16 at 8.15.02 AM Large.jpeg
    Screenshot 2023-08-16 at 8.15.02 AM Large.jpeg
    244.3 KB · Views: 101
  • Screenshot 2023-08-16 at 8.15.04 AM Large.jpeg
    Screenshot 2023-08-16 at 8.15.04 AM Large.jpeg
    165.4 KB · Views: 122
  • Screenshot 2023-08-16 at 8.15.06 AM Large.jpeg
    Screenshot 2023-08-16 at 8.15.06 AM Large.jpeg
    90.6 KB · Views: 102
  • Like
Reactions: RLL
22" ???
$2500
It's had some work done on it for sure. At least a new stock has been added, the bolt straightened, along with the obvious barrel shortening to 22". Need to know that the one who did the work isn't only good at cosmetic attributes, but can actually make it feed and cycle reliably. A picture of a recent target would be nice along with them adding a M70 wing style safety.

Otherwise they are reaching for a price that is out of bounds.
 
It's had some work done on it for sure. At least a new stock has been added, the bolt straightened, along with the obvious barrel shortening to 22". Need to know that the one who did the work isn't only good at cosmetic attributes, but can actually make it feed and cycle reliably. A picture of a recent target would be nice along with them adding a M70 wing style safety.

Otherwise they are reaching for a price that is out of bounds.
I think all the work may have been done at Triple River/CZ custom shop. I really think that price is great for the limited runs in .500J. You are absolutely correct it may need work. I also think bolt has NOT been straightened (but looking at it on phone).
 
I’m seriously waiting to the Krish purchase announcement. Haaaa. The seller also has a Jim Brockman “built” CZ in .550 Magnum for around the same price. Awesome stopping rifle. Original CZ stock with swivel stud in forend. Oooof. If you have brass, the barreled action/work by a solid smith is likely worth the ask. Still needs bolt work (as did the other two) and 3 pos safety.
 
Nice S2 ?


I'm afraid to buy anything, anymore.
 

Attachments

  • Screenshot 2023-08-17 at 10.11.16 AM.png
    Screenshot 2023-08-17 at 10.11.16 AM.png
    1.5 MB · Views: 93
  • Screenshot 2023-08-17 at 10.11.18 AM.png
    Screenshot 2023-08-17 at 10.11.18 AM.png
    1.6 MB · Views: 99

Attachments

  • Screenshot 2023-08-17 at 10.11.44 AM.png
    Screenshot 2023-08-17 at 10.11.44 AM.png
    2.5 MB · Views: 92
  • Screenshot 2023-08-17 at 10.11.46 AM.png
    Screenshot 2023-08-17 at 10.11.46 AM.png
    555.9 KB · Views: 107
Forgive my ignorance but didn’t the R93 have some issues? Or was that hearsay?
 
Came upon this specimen in my searches,
A very basic Dumoulin in .416 Riby for only 1530€ (yes it is located in Europe, France more specifically)

Maybe have someone redo that ugly stock and you have yourself a very serviceable Africa weapon!


View attachment 551475


View attachment 551479


Looks like a gun built on a standard length commercial action from FN. Evidenced by the cut out at the front for the 416 bullet to clear during loading and the right-of-action safety. They didn’t alter the bolt knob either.

Not a terrible gun, but definitely bottom of the barrel on minimum-viable for a 416 Rigby. For less than 3x the price, I think @VertigoBE 416 Rigby is worth about 30x the money.
 

Forum statistics

Threads
65,194
Messages
1,438,198
Members
134,899
Latest member
AlonzoBeit
 

 

 

Latest posts

Latest profile posts

I have made it to Atlanta this morning, few other outfitters on same flight and our luggage never came trough, looks like mine will go via France to Denver hope it gets there before the ISE show starts on the 8th TOMORROW!



flying to Denver in an hour! is it to early to hit the bar:)
FIXING TO HEAD TO DALLAS FOR TEXAS TROPHY NEXT WEEK YALL COME SEE THE EVENT.
TakeMeLord wrote on Hunt anything's profile.
Suppressor Question.. you shot a waterbuck, followed vapor trail.
May I ask: Brand of Suppressor? Caliber of rifle
AND
Dis airport secutity give you any hassles about the silencer? Thanks, Dale
RolandtheHeadless wrote on intj's profile.
Hi. Will you take $90 including shipping for the 28 Nosler brass?

Jim
Mauser3000 wrote on HBartley's profile.
Hello,

I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?

Thank you.

-Nathan
 
Top