Equipment Recommendations

[Newboomer]

Be careful about cartridge overall length when setting up your dies. Short rounds up the pressure and can give you false groups. Long rounds don't chamber very well and can cause problems. Good luck and have fun. It's a brave new world you are about to enter.

 

[sgt_zim]

Different opinions on this piece of equipment but I prefer it to the horizontal trimmers. I find it to be a lot faster and keeps the necks the same length.

https://littlecrowgunworks.com/?v=7516fd43adaa

well rats. they don't have any for 9.3x62

 

[Rob404]

I liked my lee until Phil turned me onto the Lyman, it is great.

Cole let me know if you need a hand primer and I will send you one of my extras.

I mentioned Lee because they are pretty cheap and my only usage is bullet removable and an occasional Jeff load,however I do prefer their Die sets over RCBS

 

[Bullthrower338]

I mentioned Lee because they are pretty cheap and my only usage is bullet removable and an occasional Jeff load,however I do prefer their Die sets over RCBS

Sorry Rob, I was referring to the hand priming tools. Lee does make good dies as far as I’ve used. Their crimp dies are great

 

[cagkt3]

Great stuff, and thanks to everyone! Keep it coming, I don't think my shopping list is long enough yet

 

[Rob404]

Sorry Rob, I was referring to the hand priming tools. Lee does make good dies as far as I’ve used. Their crimp dies are great

Their later hand prime tools are kinda crappy but I do use their early models

 

[Hogpatrol]

Another option for priming is the RCBS bench priming tool. I have several tubes for the different size and brand of primers I use.

http://rcbs.com/Products/Priming/Tools/Automatic-Priming-Tool.aspx

 

[Ridgewalker]

I’ve used C&H, Lee, RCBS, Hornady and maybe a couple of other brands of dies, but my current preference is Redding. I still prefer the old model of Lee hand primer, but you can no longer get replacement parts, so I’m looking for a new replacement.
I use 2 presses. A Lyman turret for 300WM and down and a Lee Classic for big stuff with their quick release, pulling bullets and miscellaneous operations.

 

[Hogpatrol]

well rats. they don't have any for 9.3x62

Check this model. It has the 9.3x62
https://littlecrowgunworks.com/product/wftbb-trim-chamber/?v=7516fd43adaa