350 Rigby

KSummers207

New member
Joined
Jan 9, 2026
Messages
13
Reaction score
42
Hi Everyone! I’m a new member but long time lurker of the forum. My adventure began with my hunting/fishing partner of around 10 years, nearly 45 years my senior. The stories of his several dozen safaris back in the day coupled with my readings of all the classics really sparked the fire of heading to Africa. With a strong interest in historic/quality firearms, I recently began the search for a rifle and came across a Rigby 350 Magnum that I could not pass up. I thought I’d share some pictures. Although my safari is likely a few years out, I can’t wait to practice with the new-to-me rifle!

IMG_5969.jpeg
IMG_5970.jpeg
IMG_5971.jpeg
 
Last edited by a moderator:
Welcome and beautiful rifle!
 
Hi Everyone! I’m a new member but long time lurker of the forum. My adventure began with my hunting/fishing partner of around 10 years, nearly 45 years my senior. The stories of his several dozen safaris back in the day coupled with my readings of all the classics really sparked the fire of heading to Africa. With a strong interest in historic/quality firearms, I recently began the search for a rifle and came across a Rigby 350 Magnum that I could not pass up. I thought I’d share some pictures. Although my safari is likely a few years out, I can’t wait to practice with the new-to-me rifle!
@KSummers207
Congratulations on a beautiful rifle in an outstanding calibre.
The 350 Rigby was highly regarded as a plains game cartridge with 225 gn bullets at 2600fps and adequate for DG loaded with 300gn bullets.
Todoy with new powders and projectile you will be able to substantially improve on these numbers.
The good ol 35 Whelen loaded properly will easily eclipse the old Rigby with 225s @ 2,900fps.
With judicious handloads you will easily equal and surpass this in the Rigby.
You have made a wise choice and a great investment that will serve you well for a lifetime.
Bob
 
Thank you all for your warm welcomes and comments! One thing that has been weighing heavy on my mind is the idea of scoping it.
I understand that altering a 100 year old rifle is generally not looked highly upon and is going to have ramifications from a value standpoint. Would I be doing this rifle an injustice by scoping it or could the juice possibly be worth the squeeze in terms of utilization? I appreciate the thoughts/recommendations from folks like you who are more knowledgeable on this stuff than I. As Bob mentioned, I envision this rifle for plains game and big game here in the U.S. If only I would have found this rifle before my Maine moose hunt a few years back…
 
I'd say that depends on your age and eyesight.

The rifle has some very good and usable sights already on it.

The only way most of us would like to see a rifle like that scoped is if an original scope mount and scope from that era could be located and professionally installed. A B-square adapter mount and new Vortex scope would just about ruin it.
 
I'd say that depends on your age and eyesight.

The rifle has some very good and usable sights already on it.

The only way most of us would like to see a rifle like that scoped is if an original scope mount and scope from that era could be located and professionally installed. A B-square adapter mount and new Vortex scope would just about ruin it.
I agree on the original mount since that becomes part of the rifle. But I would have no problem with modem high quality glad being out on it, such as a Swarovski, Zeiss, etc. in the appropriate magnification range for the caliber.
 
The question of keep original or make useful can be hard. I love old original rifles like this. However, I'm at an age that having a scope is pretty much needed for any reasonable distance and to help ensure humane shot placement, outside of a shotgun.

While I don't have a rifle this cool, I did just pick up an EMIL KERNER & SOHN, 8MM MAUSER with Double Set Triggers that will end up with a tasteful scope on i after I have time to clean it and test it out some. It's a pre 1940 rifle from Germany, and is a darn nice looking rifle. However, since it's not a collectable as a Rigby and is no longer original in that in its life here in the USA the horn butt pad and grip cap have been replaced with stupid plastic and nice bright stainless screws, I won't really feel guilty. I do however plan to put horn back on it.

If I can get the rifle to be accurate, I thinking I may mate this with a 9.3 as my Africa pair.

It's nice that we are all so blessed so we can make these hard decisions.










 
Last edited:
Thank you all for your warm welcomes and comments! One thing that has been weighing heavy on my mind is the idea of scoping it.
I understand that altering a 100 year old rifle is generally not looked highly upon and is going to have ramifications from a value standpoint. Would I be doing this rifle an injustice by scoping it or could the juice possibly be worth the squeeze in terms of utilization? I appreciate the thoughts/recommendations from folks like you who are more knowledgeable on this stuff than I. As Bob mentioned, I envision this rifle for plains game and big game here in the U.S. If only I would have found this rifle before my Maine moose hunt a few years back…
please dont alter it ,if you need a classic that you want to scope I will trade you my 375 rebore from a 350 rigby by Paul Roberts
 

Attachments

  • D9A58DD1-2D9A-45E5-9F2A-1F771794B882.jpeg
    D9A58DD1-2D9A-45E5-9F2A-1F771794B882.jpeg
    668.1 KB · Views: 154
That's a nice example of a 350, it appears un messed with. I think brass and dies is going to be the hard part there.
 

Forum statistics

Threads
68,262
Messages
1,517,495
Members
152,036
Latest member
DelorasE18
 

 

 

Latest posts

Latest profile posts

blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
LRich wrote on Andrew62's profile.
Andrew, I commented that your on 375 H&H for sale was the fair price.

Like I commented, my classic stainless has the original 24” barrel.

Did you buy yours with the barrel already cut down to 21” or did you do it (or a gunsmith)?
Zim Fan wrote on Charlie64's profile.
You might have edited your post on the PH in the Bubye. I know the PH and is a wonderful person and a fmaily man and runs a succesful business in Zim and just doesn't want the attention that the internet offers, the ugly kind.
 
Top