WC Scott 10 Bore. Superb Lockwork

Altitude sickness

Gold supporter
AH ambassador
Joined
Jun 24, 2023
Messages
8,068
Reaction score
32,056
Location
Michigan
Media
54
Articles
1
Hunting reports
Africa
1
USA/Canada
2
Early WC Scott 10 Bore made in 1889 is in excellent original condition. The engraving is sharp and well executed.

The Lockwork is of the highest quality with Bridle exhibiting good case color. The mainsprings and sear springs are polished to a mirror finish.
Rebounding hammers
This gun is fully functioning and tight. Screws are perfectly timed. Chambers measure 2 7/8”. Bores are good. Barrels are 7 out of 10 and ring nicely with tight ribs. Wood to metal finish is excellent.

The straight grip stock and splinter fore-end are made from highly figured French Walnut.

Uncasing this gem at the range or field will make you proud that you paid 1/4 the price of a mass produced factory shotgun with cheesy fake engraving and cheap wood. I have killed Turkeys and Geese with great efficiency and effectiveness with this piece of art.

8.5 pounds

LOP 13 7/8”

Drop at comb 1 3/4” drop at the heel 2 5/8”

Slight cast for the right hand shooter

Chokes measure right barrel modified. Left barrel “light full”

Wall thickness at muzzle is 0.028 and minimum barrel wall thickness is 0.030

As Diggory Hadoke and our own @rookhawk say ; buy the gun not the name. This gun is an example of the quality that WC Scott produced.

$1800

I have RST and Salt Creek no. 2-4 lead and Bizmuth shells available for sale also. Most is temporarily out of stock at RST. I will make the buyer a great deal on safe shells for the gun.
IMG_3956.jpeg

IMG_3950.jpeg
 

Attachments

  • IMG_3973.jpeg
    IMG_3973.jpeg
    5.3 MB · Views: 47
  • IMG_3970.jpeg
    IMG_3970.jpeg
    2.9 MB · Views: 42
  • IMG_3967.jpeg
    IMG_3967.jpeg
    2.6 MB · Views: 33
  • IMG_3966.jpeg
    IMG_3966.jpeg
    4.3 MB · Views: 35
  • IMG_3965.jpeg
    IMG_3965.jpeg
    3.9 MB · Views: 33
  • IMG_3963.jpeg
    IMG_3963.jpeg
    2.3 MB · Views: 31
  • IMG_3962.jpeg
    IMG_3962.jpeg
    2.5 MB · Views: 30
  • IMG_3961.jpeg
    IMG_3961.jpeg
    2 MB · Views: 33
  • IMG_3960.jpeg
    IMG_3960.jpeg
    2.2 MB · Views: 35
  • IMG_3959.jpeg
    IMG_3959.jpeg
    3.3 MB · Views: 34
  • IMG_3958.jpeg
    IMG_3958.jpeg
    6.7 MB · Views: 33
  • IMG_3957.jpeg
    IMG_3957.jpeg
    2.9 MB · Views: 32
  • IMG_3955.jpeg
    IMG_3955.jpeg
    3.2 MB · Views: 31
  • IMG_3954.jpeg
    IMG_3954.jpeg
    2.4 MB · Views: 31
  • IMG_3953.jpeg
    IMG_3953.jpeg
    3.9 MB · Views: 29
  • IMG_3952.jpeg
    IMG_3952.jpeg
    6.1 MB · Views: 27
Fine piece of functional art. All British 10 gauge shotguns (and Paradox style guns) featured 2 7/8” chambers (and a few early blackpowder 10 gauges even featured 2 5/8” chambers).

10 gauge side by side shotguns featuring the modern 3 1/2” chambers were built in the USA, Spain, Belgium & Italy. Ithaca started building them in 1932 and the first one was owned by Major Charles Askins Sr.

But I don’t believe anybody currently produces a 10 gauge shotgun anymore, at all. Not since the Browning Gold semi automatic was discontinued back in 2023.
 
Last edited:
Good Morning H-H, These British shotguns are more than the sum of their parts.
Anecdotally the loads from this shotgun seem to hammer birds without much felt recoil.

Apparently the 2 7/8” is a “Square Load”

A traditional 10-bore 2 7/8-inch black powder or early nitro load utilizing 1 1/4 ounces to 1 3/8 ounces of lead shot is widely considered a classic "square load". In traditional shotgun lore, a square load means the shot column height equals the bore diameter (roughly a 1 5/8 oz payload optimized for a 0.775-inch 10-gauge bore height-to-width ratio, though 1 1/4 oz was historically cited as the ideal patterning sweet spot for the shorter 2 7/8" case). I

Understanding the Square Load in 10 Bore
    • Definition: A payload where the height of the shot column in the barrel matches the interior diameter of the bore.
    • Historical 10-Bore Payload: Traditionally, 2 7/8-inch British 10-bore game and wildfowling guns were regulated for 1 1/4 to 1 3/8 ounces of lead shot (backed by proportional black powder dram equivalents). [1]
    • Pattern Performance: Shooters and old-school reloaders maintained that this balanced ratio gave optimal, even patterns without excessive deformed pellets or undue recoil.
 
What a fantastic gun. You don’t see many hammer guns with that much engraving in that type of condition.
 
What an incredible piece of history. I’m very much taken with the engraving. The fact that you’ve done load development is a huge part of the deal. Best of luck with the sale.

In case anyone is wondering, @Altitude sickness is a great person to do business with.
 
I am internet acquainted with a few Damascus barrel shotgun shooters. They report that as long as the loads fired are kept within the shotguns limits, they are perfectly safe to shoot. Comments seen where they they are considered "generally unsafe" appear to be the result of litigious risk version. Guns of that era that wee made with well constructed Damascus barrels were the best and strongest of the era and those that have been treated well, which this one certainly so appears is expected to continue to provide much pleasure. GLWS and congrats to the purchaser.
 
Oh man. I’d give my left arm for that. Do you take left arms.
 

Forum statistics

Threads
69,526
Messages
1,549,692
Members
162,514
Latest member
JohannaBoi
 

 

 

Latest profile posts

Andrew NOLA wrote on Huntforever's profile.
Lbarr might be a scammer

it appears he sold the same brass to me and another member
Nomosendero wrote on gregrn43's profile.
Between Blak Rock and Pocahontas, I did not want to say that on the forum. That's a nice Cat!
curt672 wrote on WoodencrossIII's profile.
just making sure my message went threw
30-06Ken wrote on ftothfadd's profile.
I'll take the Vortex scope cover you have listed in the Pay it Forward thread.

Ken [redacted]
Scott CWO wrote on mark-hunter's profile.
Hi Mark. My email is [redacted]
 
Top