on a lighter note...

I used to drive an F250 7.3L Diesel. I never shut it down when fueling it up. It takes massive pressure and/or massive heat to ignite Diesel. A cigarette won't get there.
I still drive my ‘02 7.3 (only 131K on it) and I almost never shut it off when fueling, especially after pulling or higher speed driving. Have to let the turbo cool off. I see a lot of guys with diesels never letting the turbo cool. Maybe with the newer trucks you don’t have to, but I’ll bet your supposed to?
 
I still drive my ‘02 7.3 (only 131K on it) and I almost never shut it off when fueling, especially after pulling or higher speed driving. Have to let the turbo cool off. I see a lot of guys with diesels never letting the turbo cool. Maybe with the newer trucks you don’t have to, but I’ll bet your supposed to?

Given the temperature in which exhaust turbines operate and the very high rotational speeds you’d think that letting the turbine’s rpms and exaust temp drop before turning off the engine and thus interrupt lubrication would be common sense. But I guess common sense is not that common. Half the drivers on the roads don’t understand that brake pads wear out so talking about oil pumps and engine lubrication is like trying to teach basic economy to a commie.
 
388977_262705103839391_1347157703_n.jpg
 
You can also do that in gasolin, no problem. I have done that many times to demonstrate whic is most dangerous, a full or an empty tank.
tick tick tick tick

Can do and should do aren't always the same thing. Yes it works but what happens when someone you showed that to tries it show it to someone else and doesn't get it right. Yikes!
 
Wrong text numbers.

1626787427695.png



1626787561238.png


1626787591068.png



1626787643861.png



1626787708018.png


1626787898899.png


1626788040573.png


1626788153701.png


1626788256470.png

1626788333244.png


1626788429612.png


1626788450146.png


1626788480612.png
 

Forum statistics

Threads
67,981
Messages
1,511,307
Members
149,240
Latest member
freightsbroker
 

 

 

Latest profile posts

Zim Fan wrote on Charlie64's profile.
You might have edited your post on the PH in the Bubye. I know the PH and is a wonderful person and a fmaily man and runs a succesful business in Zim and just doesn't want the attention that the internet offers, the ugly kind.
Andrew62 wrote on Imac45acp's profile.
Hello,

Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.

Thank you for your time,

Andrew
1r4rc wrote on Corylax18's profile.
Saw your post. Nice. Denver too. Genesee area (just off 70) if ever up this way. Alternatively, do you have a membership at GGC? Whatever, you'll have a wonderful time in Africa. Enjoy.
'68boy wrote on UNTAMED KNIVES's profile.
Did you get my info? I sent name and requested info today. Want to make sure you received it. I don’t need any serial number etc
Leaner professional hunter
 
Top