on a lighter note...

I used to drive an F250 7.3L Diesel. I never shut it down when fueling it up. It takes massive pressure and/or massive heat to ignite Diesel. A cigarette won't get there.
I still drive my ‘02 7.3 (only 131K on it) and I almost never shut it off when fueling, especially after pulling or higher speed driving. Have to let the turbo cool off. I see a lot of guys with diesels never letting the turbo cool. Maybe with the newer trucks you don’t have to, but I’ll bet your supposed to?
 
I still drive my ‘02 7.3 (only 131K on it) and I almost never shut it off when fueling, especially after pulling or higher speed driving. Have to let the turbo cool off. I see a lot of guys with diesels never letting the turbo cool. Maybe with the newer trucks you don’t have to, but I’ll bet your supposed to?

Given the temperature in which exhaust turbines operate and the very high rotational speeds you’d think that letting the turbine’s rpms and exaust temp drop before turning off the engine and thus interrupt lubrication would be common sense. But I guess common sense is not that common. Half the drivers on the roads don’t understand that brake pads wear out so talking about oil pumps and engine lubrication is like trying to teach basic economy to a commie.
 
388977_262705103839391_1347157703_n.jpg
 
You can also do that in gasolin, no problem. I have done that many times to demonstrate whic is most dangerous, a full or an empty tank.
tick tick tick tick

Can do and should do aren't always the same thing. Yes it works but what happens when someone you showed that to tries it show it to someone else and doesn't get it right. Yikes!
 
Wrong text numbers.

1626787427695.png



1626787561238.png


1626787591068.png



1626787643861.png



1626787708018.png


1626787898899.png


1626788040573.png


1626788153701.png


1626788256470.png

1626788333244.png


1626788429612.png


1626788450146.png


1626788480612.png
 

Forum statistics

Threads
63,364
Messages
1,393,799
Members
123,792
Latest member
Oscarnic
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on 0777446998
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top