I need your help

@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
 
cant tell exactly from the OP's pic.. but based on the one pic and the bullet measurement, I'd guess .35 Whelen...

Here's a factory loaded federal .30-06 next to a re-sized and primed .35 Whelen made from re-sizing a federal 30-06 case (just pulled from my ammo locker)..

Looks pretty similar to the OP pic..



IMG_1943.jpg
 
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
@Jaegger
Plenty of cool threads on this forum about the 400 Whelen.
Bob
 
@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
"petrov design"? Anyway, I would go for the .400 Whelen AI in an '06 case. Might get a couple of grains more powder stuffed into it? LOL
 
Back in the '70s, I reloaded paper (actually cardboard) 12ga. shells before I transitioned to AA plastic hulls. You could load the cardboard hulls "hotter" (more powder and shot than the plastic hulls). Every once in a while, the brass base would separate from the cardboard hull upon firing. Not a big deal, but I would have to remove the barrel from my Remington 1100 to get out the hull from the chamber. It seemed to only happen with multiple reloading of the cardboard hulls. I've seen recently where Remington is making the paper hulls again.
Same for an old guy I shot skeet with around that time. He had been a factory shooter in prior years and had "a warehouse full" of paper hulls. Reloaded them just once and left them on the ground, IIRC.
 

Forum statistics

Threads
68,136
Messages
1,514,654
Members
150,783
Latest member
CallieKirk
 

 

 

Latest posts

Latest profile posts

Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
Qwatali wrote on Charly L's profile.
Nice Report! Im about to pull the trigger on booking the LDE with Patrick. I have been talking about it with him for about 3 yrs now. Romain hit me up the other day with an offer I can't refuse for 2027.
LRich wrote on Andrew62's profile.
Andrew, I commented that your on 375 H&H for sale was the fair price.

Like I commented, my classic stainless has the original 24” barrel.

Did you buy yours with the barrel already cut down to 21” or did you do it (or a gunsmith)?
Zim Fan wrote on Charlie64's profile.
You might have edited your post on the PH in the Bubye. I know the PH and is a wonderful person and a fmaily man and runs a succesful business in Zim and just doesn't want the attention that the internet offers, the ugly kind.
Andrew62 wrote on Imac45acp's profile.
Hello,

Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.

Thank you for your time,

Andrew
 
Top