I need your help

@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
 
cant tell exactly from the OP's pic.. but based on the one pic and the bullet measurement, I'd guess .35 Whelen...

Here's a factory loaded federal .30-06 next to a re-sized and primed .35 Whelen made from re-sizing a federal 30-06 case (just pulled from my ammo locker)..

Looks pretty similar to the OP pic..



IMG_1943.jpg
 
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
@Jaegger
Plenty of cool threads on this forum about the 400 Whelen.
Bob
 
@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
"petrov design"? Anyway, I would go for the .400 Whelen AI in an '06 case. Might get a couple of grains more powder stuffed into it? LOL
 
Back in the '70s, I reloaded paper (actually cardboard) 12ga. shells before I transitioned to AA plastic hulls. You could load the cardboard hulls "hotter" (more powder and shot than the plastic hulls). Every once in a while, the brass base would separate from the cardboard hull upon firing. Not a big deal, but I would have to remove the barrel from my Remington 1100 to get out the hull from the chamber. It seemed to only happen with multiple reloading of the cardboard hulls. I've seen recently where Remington is making the paper hulls again.
Same for an old guy I shot skeet with around that time. He had been a factory shooter in prior years and had "a warehouse full" of paper hulls. Reloaded them just once and left them on the ground, IIRC.
 

Forum statistics

Threads
66,424
Messages
1,469,328
Members
140,756
Latest member
Yvonne9016
 

 

 

Latest profile posts

A Frame66 wrote on Marcus bock's profile.
Hi Marcus
I'll 2nd limcroma! Booked 2nd trip at SCI last week. Those guys are great. Trying to get hooked up with Peter when he gets to the states if I can break away.
roklok wrote on SkullKeeper's profile.
What sling studs do those swivels fit ? They look to be quite a bit wider than the standard modern swivels. They may be just what I need for my Remington 30 Express wide swivel studs. Can you measure the pin diameter ?
Safari Dave wrote on Boardwalk72's profile.
Do you know where your .240 Weatherby was manufactured?
Culling old sable cow with bow!

 
Top