I need your help

@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
 
cant tell exactly from the OP's pic.. but based on the one pic and the bullet measurement, I'd guess .35 Whelen...

Here's a factory loaded federal .30-06 next to a re-sized and primed .35 Whelen made from re-sizing a federal 30-06 case (just pulled from my ammo locker)..

Looks pretty similar to the OP pic..



IMG_1943.jpg
 
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
@Jaegger
Plenty of cool threads on this forum about the 400 Whelen.
Bob
 
@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
"petrov design"? Anyway, I would go for the .400 Whelen AI in an '06 case. Might get a couple of grains more powder stuffed into it? LOL
 
Back in the '70s, I reloaded paper (actually cardboard) 12ga. shells before I transitioned to AA plastic hulls. You could load the cardboard hulls "hotter" (more powder and shot than the plastic hulls). Every once in a while, the brass base would separate from the cardboard hull upon firing. Not a big deal, but I would have to remove the barrel from my Remington 1100 to get out the hull from the chamber. It seemed to only happen with multiple reloading of the cardboard hulls. I've seen recently where Remington is making the paper hulls again.
Same for an old guy I shot skeet with around that time. He had been a factory shooter in prior years and had "a warehouse full" of paper hulls. Reloaded them just once and left them on the ground, IIRC.
 

Forum statistics

Threads
67,216
Messages
1,490,813
Members
144,560
Latest member
EdithDoher
 

 

 

Latest profile posts

channelkat wrote on NMAmateurHunter's profile.
FYI we need NM members! Please spread the word and join us if you can make it.
1775843806328.png
observe wrote on NZ Jack's profile.
Jerome, do you think my last post in rough camping must maybe shift as an article?
rayford445 wrote on Hunter-Habib's profile.
Good afternoon,

I'm trying to get in contact with Mr Butch Searcy. I have the opportunity to buy one of his rifles chambered in 577 nitro Express however the seller does not have any of the paperwork with the information about what ammunition or bullet weight was used to regulate it. I know he is not making firearms anymore but I wanted to reach out after seeing one of your post about him.
Daryl S wrote on mgstucson's profile.
Hi - the only (best) method of sending you the .375/06IMP data is with photographing my book notes. My camera died so the only way I can do it is with my phone. To do that, I would need your e-mail address, as this
new Android phone is too complicated to upload to my desk computer, which would be easier and to down-grade, reduce the file sizes.
Best wishes
Daryl
 
Top