Custom 550 Magnum

NTO

AH enthusiast
Joined
Jun 27, 2017
Messages
311
Reaction score
591
Media
14
Beautiful Custom 550 Magnum Built on a Remington 1917
Pac Nor Match Grade Barrel 26"
English Walnut Quartersawn for strength stock reinforced with 1/2" steel rod
Hand Checkered with Ebony Forend also has grip cap & cross bolt caps
NEGS Sights & Barrel Sling
CCH Trigger & Cocking Piece
Recoil Reduced
Trigger & Striker are case hardened
This rifle is in like new condition has slight impression in check piece that can be seen in pic
Unknown Builder but the quality is amazing
Comes with 9 pieces of Jameson brass
Weight 10.4 lbs
LOP 13 5/8"
More Pics available to interested parties
$4500 shipped
IMG_7360.JPG
IMG_7383.JPG
 
Is 550 Magnum the cartridge?
 
Yes 550 mag is the caliber basically alittle more power than the 577 NE in a bolt gun. This gun was built to handle this brute of a cartridge. CH4D list dies and there is some brass out there for it.
There were two versions I take this the one on a 505 case. Well I guess the were i fore got the one on a 50 bmg. Case. That’s 3.
 
There were two versions I take this the one on a 505 case. Well I guess the were i fore got the one on a 50 bmg. Case. That’s 3.
Interesting! I thought there was just one and that it was based on the 460 Weatherby?
 
I don’t know I always thought there was just one version. Let me measure the brass I have and I’ll get back with you. The brass I have was made by Jameson.
The 505 version came out many years ago in oz. It was built on 14/17 action.
 
Very cool rifle. I've been intrigued by them in the past (see the thread I started last year that is linked above).

How is the recoil? Most guns in this caliber that I've seen carry an extra pound or two. 10.4 lbs sounds light.
 
I don’t know I always thought there was just one version. Let me measure the brass I have and I’ll get back with you. The brass I have was made by Jameson.
@NTO
Post
16705442765325110766689209320523.jpg
16705443182478776763466078477547.jpg
the picture of the brass. The owner of Woodleigh designed a 550 Gibbs years ago. Also made bullets for it. Modified 505 Gibbs brass. Called it 550 Gibbs.
Krish.
16705450682659211429476947795962.jpg
16705450425676482251553631602822.jpg
16705449987096662333006763981229.jpg
 
Last edited:
This is the 460 wby necked up.
 

Attachments

  • Screen Shot 2022-12-09 at 8.14.43 AM.png
    Screen Shot 2022-12-09 at 8.14.43 AM.png
    589.6 KB · Views: 236
  • Screen Shot 2022-12-09 at 8.14.44 AM.png
    Screen Shot 2022-12-09 at 8.14.44 AM.png
    617.9 KB · Views: 218
  • Screen Shot 2022-12-09 at 8.14.45 AM.png
    Screen Shot 2022-12-09 at 8.14.45 AM.png
    343.2 KB · Views: 253
This is the 460 wby necked up.
Very interesting! Thanks for sharing the article.
 

Forum statistics

Threads
67,897
Messages
1,508,623
Members
148,569
Latest member
mamtavKhatun
 

 

 

Latest posts

Latest profile posts

Andrew62 wrote on Imac45acp's profile.
Hello,

Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.

Thank you for your time,

Andrew
1r4rc wrote on Corylax18's profile.
Saw your post. Nice. Denver too. Genesee area (just off 70) if ever up this way. Alternatively, do you have a membership at GGC? Whatever, you'll have a wonderful time in Africa. Enjoy.
'68boy wrote on UNTAMED KNIVES's profile.
Did you get my info? I sent name and requested info today. Want to make sure you received it. I don’t need any serial number etc
Leaner professional hunter
MooseHunter wrote on Wildwillalaska's profile.
Hello BJ,

Don here AKA Moose Hunter. I think you got me by mistake. I have seen that rifle listed but it is not my rifle No worries
 
Top