Custom 550 Magnum

NTO

AH enthusiast
Joined
Jun 27, 2017
Messages
316
Reaction score
606
Media
14
Beautiful Custom 550 Magnum Built on a Remington 1917
Pac Nor Match Grade Barrel 26"
English Walnut Quartersawn for strength stock reinforced with 1/2" steel rod
Hand Checkered with Ebony Forend also has grip cap & cross bolt caps
NEGS Sights & Barrel Sling
CCH Trigger & Cocking Piece
Recoil Reduced
Trigger & Striker are case hardened
This rifle is in like new condition has slight impression in check piece that can be seen in pic
Unknown Builder but the quality is amazing
Comes with 9 pieces of Jameson brass
Weight 10.4 lbs
LOP 13 5/8"
More Pics available to interested parties
$4500 shipped
IMG_7360.JPG
IMG_7383.JPG
 
Is 550 Magnum the cartridge?
 
Yes 550 mag is the caliber basically alittle more power than the 577 NE in a bolt gun. This gun was built to handle this brute of a cartridge. CH4D list dies and there is some brass out there for it.
There were two versions I take this the one on a 505 case. Well I guess the were i fore got the one on a 50 bmg. Case. That’s 3.
 
There were two versions I take this the one on a 505 case. Well I guess the were i fore got the one on a 50 bmg. Case. That’s 3.
Interesting! I thought there was just one and that it was based on the 460 Weatherby?
 
I don’t know I always thought there was just one version. Let me measure the brass I have and I’ll get back with you. The brass I have was made by Jameson.
The 505 version came out many years ago in oz. It was built on 14/17 action.
 
Very cool rifle. I've been intrigued by them in the past (see the thread I started last year that is linked above).

How is the recoil? Most guns in this caliber that I've seen carry an extra pound or two. 10.4 lbs sounds light.
 
I don’t know I always thought there was just one version. Let me measure the brass I have and I’ll get back with you. The brass I have was made by Jameson.
@NTO
Post
16705442765325110766689209320523.jpg
16705443182478776763466078477547.jpg
the picture of the brass. The owner of Woodleigh designed a 550 Gibbs years ago. Also made bullets for it. Modified 505 Gibbs brass. Called it 550 Gibbs.
Krish.
16705450682659211429476947795962.jpg
16705450425676482251553631602822.jpg
16705449987096662333006763981229.jpg
 
Last edited:
This is the 460 wby necked up.
 

Attachments

  • Screen Shot 2022-12-09 at 8.14.43 AM.png
    Screen Shot 2022-12-09 at 8.14.43 AM.png
    589.6 KB · Views: 260
  • Screen Shot 2022-12-09 at 8.14.44 AM.png
    Screen Shot 2022-12-09 at 8.14.44 AM.png
    617.9 KB · Views: 237
  • Screen Shot 2022-12-09 at 8.14.45 AM.png
    Screen Shot 2022-12-09 at 8.14.45 AM.png
    343.2 KB · Views: 268
This is the 460 wby necked up.
Very interesting! Thanks for sharing the article.
 

Forum statistics

Threads
68,677
Messages
1,528,077
Members
156,041
Latest member
AlfonzoCat
 

 

 

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top