Bullets for doubles

norfolk shooter

AH legend
Joined
Dec 22, 2012
Messages
2,126
Reaction score
3,513
Location
Norfolk, UK
Media
22
Articles
1
Hunting reports
Africa
1
Member of
BASC
Hunted
UK, Norfolk, Cambridgeshire, Dumfries and Galloway, Isle of Arran (Scotland). RSA, North West, Kalahari, Limpopo
Gents! Is it safe to use banded bullets such as the barnes in a modern double? Also can you go 10 grns heavier than the regulated bullet? I guess you can if you can push that bullet fast enough.

Thanks chaps
 
Must be, I have been shooting 300 grain Barnes, North Forks, Woodleighs, Hornadys, etc in my .405 WCF with good results.
Is there something in particular that concerns you about the Barnes?

10 grains bullet weight? I also shoot 400 grain Woodleighs and Hornadys in my .405.

Of course I hand load all 300 and 400 grain ammo, except some 300 grain Hornady at 2225 fps with which the rifle was regulated.
 
I shoot the 570gr Peregrines which are basically replicas of the Barnes Banded Solid. No problems at all and nothing tomworry about.
What aspect of the banded solid is it that concerns you?
 
I’ve read in this section somewhere that the banded bullets cause excessive barrel strain. I thought it would the opposite as there is less bearing surface
 
I’ve read in this section somewhere that the banded bullets cause excessive barrel strain. I thought it would the opposite as there is less bearing surface

Well, certainly can't see that being true on the Copper solids. The solids that I shoot out of my double are brass, which is harder than the pure Copper Solids. I prefer to shoot the harder metal for a bullet that I rely on to penetrate straight, and not deform when I need it most. In my mind, that is the harder material.
 
That’s what I thought. I just don’t want to damage a nice double by using the wrong bullets
 
Has your double turned up?

Yep I haven’t got round to getting photos up on the forum or shoot it for that matter
 

Forum statistics

Threads
64,686
Messages
1,424,569
Members
131,948
Latest member
LuellaBole
 

 

 

Latest posts

Latest profile posts

gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
 
Top