7x57 favorite loads

Try W 760 or H414 with magnum primer, works very well with my 7 x57, just look in the reloading manual for load data, every rifle is different.

Hmmm...I have 3 8 pound jugs of these powders.

I probably ought to get a 7x57 to eat some of that powder up!
 
Hmmm...I have 3 8 pound jugs of these powders.

I probably ought to get a 7x57 to eat some of that powder up!

And you ask if you need help.
 
I avoid handloading like the plague but completely understand the purpose and value. I had excellent results with Sellier & Bellot factory 7x57 ammo with the 175gr nosler partition. It worked on bear, kudu, zebra, 9 impala, steinbok, hyena, baboon, etc. Just an awesome round. My 23" barreled single shot chornographed them at 2437fps so it is certainly not the fastest load that could be made for this rifle but it was plenty for all my purposes. Did I mention that the S&B 175gr partition ammo is cheap? This caliber has expensive brass to begin with so buying loaded ammo and saving the brass isn't such a bad plan either?

I'd really like to get my hands on 175gr or 180gr FMJ ammunition regulated to the same POI as my 175gr partition for a wide variety of uses. (not the use Karamojo Bell had in mind!) It's on the list if I ever get back to handloading.

Do you know anyone who sells FMJ 7 mm bullets? I don't recall having seen any.
 
Do you know anyone who sells FMJ 7 mm bullets? I don't recall having seen any.
PPU of Serbia manufacture them anyway (173gr.). Hopefully you can find someone in your neck of the woods.
 
Ruger no 1 7x57. 145 gr nosler partition, approx 15 black bear, 7 first deer for kids as if November 2019, cant ask for more, great load.
 

Attachments

  • Screen Shot 2020-04-26 at 9.18.51 AM.png
    Screen Shot 2020-04-26 at 9.18.51 AM.png
    1 MB · Views: 195
  • Screen Shot 2020-04-26 at 9.18.49 AM.png
    Screen Shot 2020-04-26 at 9.18.49 AM.png
    988.5 KB · Views: 180
  • Screen Shot 2020-04-26 at 9.19.02 AM.png
    Screen Shot 2020-04-26 at 9.19.02 AM.png
    343.1 KB · Views: 192

Attachments

  • Screenshot (649).png
    Screenshot (649).png
    1 MB · Views: 199
  • Screenshot (650).png
    Screenshot (650).png
    98.6 KB · Views: 184
That’s higher than giraffes Vagina!
 
All my 7x57s except for one are Ackley Improved so my load data is way too hot for the average 7x57. I do use RL17 in all of my loads, I get about 200fps more using the RL 17 over IMR 4350 or Varget.
 
Bullet = Winchester 175 grain soft point " cup & core " style bullet , removed from vintage Winchester Super X 7×57 mm Mauser calibre ammunition .
IMG_20200415_202413.jpg

Powder = 45.7 grains of Win 760 propellant powder
Courtesy of my good friend , @Shootist43
He essentially helped me turn a cheetal deer cartridge in to an Asian Sloth Bear cartridge .
 
This was load I used last year for whitetail. It's also about as tight shooting as I have gotten the ruger african so far. Tommorow plan on trying out some 145 gr speer grand slam loads with H4350.
20200424_143201.jpg
 
Last edited by a moderator:
and then of course there is the orangutang.
so called because his balls are made of brass.
as he swings from tree to tree, echoing through the forest can be clearly heard the sound orag - atang, orang - atang.
 

Forum statistics

Threads
67,912
Messages
1,509,107
Members
148,709
Latest member
56ditcom
 

 

 

Latest posts

Latest profile posts

Andrew62 wrote on Imac45acp's profile.
Hello,

Am I reading your post correctly to say that the Tsavo rifle will be coming out with a composite stock later this year? I ask because I had been looking very hard for a Tsavo, but if there is going to be a composite stock model I will wait for that.

Thank you for your time,

Andrew
1r4rc wrote on Corylax18's profile.
Saw your post. Nice. Denver too. Genesee area (just off 70) if ever up this way. Alternatively, do you have a membership at GGC? Whatever, you'll have a wonderful time in Africa. Enjoy.
'68boy wrote on UNTAMED KNIVES's profile.
Did you get my info? I sent name and requested info today. Want to make sure you received it. I don’t need any serial number etc
Leaner professional hunter
MooseHunter wrote on Wildwillalaska's profile.
Hello BJ,

Don here AKA Moose Hunter. I think you got me by mistake. I have seen that rifle listed but it is not my rifle No worries
 
Top