7x57 favorite loads

Try W 760 or H414 with magnum primer, works very well with my 7 x57, just look in the reloading manual for load data, every rifle is different.

Hmmm...I have 3 8 pound jugs of these powders.

I probably ought to get a 7x57 to eat some of that powder up!
 
Hmmm...I have 3 8 pound jugs of these powders.

I probably ought to get a 7x57 to eat some of that powder up!

And you ask if you need help.
 
I avoid handloading like the plague but completely understand the purpose and value. I had excellent results with Sellier & Bellot factory 7x57 ammo with the 175gr nosler partition. It worked on bear, kudu, zebra, 9 impala, steinbok, hyena, baboon, etc. Just an awesome round. My 23" barreled single shot chornographed them at 2437fps so it is certainly not the fastest load that could be made for this rifle but it was plenty for all my purposes. Did I mention that the S&B 175gr partition ammo is cheap? This caliber has expensive brass to begin with so buying loaded ammo and saving the brass isn't such a bad plan either?

I'd really like to get my hands on 175gr or 180gr FMJ ammunition regulated to the same POI as my 175gr partition for a wide variety of uses. (not the use Karamojo Bell had in mind!) It's on the list if I ever get back to handloading.

Do you know anyone who sells FMJ 7 mm bullets? I don't recall having seen any.
 
Do you know anyone who sells FMJ 7 mm bullets? I don't recall having seen any.
PPU of Serbia manufacture them anyway (173gr.). Hopefully you can find someone in your neck of the woods.
 
Ruger no 1 7x57. 145 gr nosler partition, approx 15 black bear, 7 first deer for kids as if November 2019, cant ask for more, great load.
 

Attachments

  • Screen Shot 2020-04-26 at 9.18.51 AM.png
    Screen Shot 2020-04-26 at 9.18.51 AM.png
    1 MB · Views: 119
  • Screen Shot 2020-04-26 at 9.18.49 AM.png
    Screen Shot 2020-04-26 at 9.18.49 AM.png
    988.5 KB · Views: 107
  • Screen Shot 2020-04-26 at 9.19.02 AM.png
    Screen Shot 2020-04-26 at 9.19.02 AM.png
    343.1 KB · Views: 119

Attachments

  • Screenshot (649).png
    Screenshot (649).png
    1 MB · Views: 103
  • Screenshot (650).png
    Screenshot (650).png
    98.6 KB · Views: 108
That’s higher than giraffes Vagina!
 
All my 7x57s except for one are Ackley Improved so my load data is way too hot for the average 7x57. I do use RL17 in all of my loads, I get about 200fps more using the RL 17 over IMR 4350 or Varget.
 
Bullet = Winchester 175 grain soft point " cup & core " style bullet , removed from vintage Winchester Super X 7×57 mm Mauser calibre ammunition .
IMG_20200415_202413.jpg

Powder = 45.7 grains of Win 760 propellant powder
Courtesy of my good friend , @Shootist43
He essentially helped me turn a cheetal deer cartridge in to an Asian Sloth Bear cartridge .
 
This was load I used last year for whitetail. It's also about as tight shooting as I have gotten the ruger african so far. Tommorow plan on trying out some 145 gr speer grand slam loads with H4350.
20200424_143201.jpg
 
Last edited by a moderator:
and then of course there is the orangutang.
so called because his balls are made of brass.
as he swings from tree to tree, echoing through the forest can be clearly heard the sound orag - atang, orang - atang.
 
156 gr oryx, mine loves em and they have plenty of punch. I max out at 46 gr of H4350, load is out of John Barness Big Book of Gun Gack.
Huge fan of the norma bullets. Would like to try the oryx in my 9.3x62.
 

Forum statistics

Threads
53,989
Messages
1,142,525
Members
93,358
Latest member
DenaI60135
 

 

 

Latest profile posts

Cwoody wrote on Woodcarver's profile.
Shot me email if Beretta 28 ga DU is available
Thank you
Pancho wrote on Safari Dave's profile.
Enjoyed reading your post again. Believe this is the 3rd time. I am scheduled to hunt w/ Legadema in Sep. Really looking forward to it.
check out our Buff hunt deal!
Because of some clients having to move their dates I have 2 prime time slots open if anyone is interested to do a hunt
5-15 May
or 5-15 June is open!
shoot me a message for a good deal!
dogcat1 wrote on skydiver386's profile.
I would be interested in it if you pass. Please send me the info on the gun shop if you do not buy it. I have the needed ammo and brass.
Thanks,
Ross
 
Top