416WSM on Siamese Mauser & 416/348Ackley Improved on Martini

[AZDAVE]

Like the design of the saftey. Good work.

 

[BlueFlyer]

Feedback from my cousin is that he does not like the left hand side activation. He would prefer that it fuctioned the same as early Brno safeties. Where forward and right, orientated across the bolt is safe. Fully back and orientated in line with the bolt is Fire.
By only mirroring the lever I think this can be achieved, but I cannot include the bolt lock with the laser cut blanks I have. Back to the shed to make one up for trial #2.

 

[Ontario Hunter]

Feedback from my cousin is that he does not like the left hand side activation. He would prefer that it fuctioned the same as early Brno safeties. Where forward and right, orientated across the bolt is safe. Fully back and orientated in line with the bolt is Fire.
By only mirroring the lever I think this can be achieved, but I cannot include the bolt lock with the laser cut blanks I have. Back to the shed to make one up for trial #2.

I would not want full back to be the fire position if avoidable. It is more awkward for thumb to pull safety back when gun is mounted. Simply pushing safety forward is more natural than trying to catch, hold, and pull it back. If safety remains on left side, it definitely should be pushed forward to fire for right handed rifle, if possible.

 

[BlueFlyer]

I now understand this design better after working on my own safety design.

The initial force to pull the cocking piece off the sear is high and needs a large pressure pad on the safety lever or else it is uncomfortable.
I have also improved the ramp on the cocking piece to help the safety pin cam the cocking piece off the sear.

To improve my lever I added an extension at the end to double the size of the pressure point on the lever. To attach the extension I turned a stepped cylinder OD of 4mm and then stepped down to 2.5mm. I drilled a 2.5mm hole through the lever and pressed them together. Finally I riveted the top of the 2.5mm shaft into the top of the lever and then polished it all back to a flat surface. Finally I flame blued it just to make it look a bit better. This is still a prototype, the final version will be case hardened.

The changes have greatly improved the ease of applying the safety. The clearance for the scope is fantastic. There has never been any problems moving it from fully locked bolt handle back to safe and then fire. It is a true 3 position safety.

 

[BlueFlyer]

A few updates on the 416WSM Siamese Mauser.
I changed the scope from the Vortex 2-7X32 which had performed perfectly, to a Leupold HD3 1.5-5X20 and put it in the lowest rings available.

100 pieces of Bertram Brass arrived today with 416WSM head stamp - guess I can use it anywhere now.

 

[Ontario Hunter]

Looks great. How's the bolt modification coming along?

 

[rdog]

Well you wouldn't go wong if you got an albow as well.

I would have a party& get drunk & i do not drink.

 

[rdog]

A few updates on the 416WSM Siamese Mauser.
I changed the scope from the Vortex 2-7X32 which had performed perfectly, to a Leupold HD3 1.5-5X20 and put it in the lowest rings available.
View attachment 712532
View attachment 712533

100 pieces of Bertram Brass arrived today with 416WSM head stamp - guess I can use it anywhere now.
View attachment 712537

Good job, the rifle looks great you are very talented.

 

[BlueFlyer]

How's the bolt modification coming along?

I am very reluctant to start cutting into the Siamese Mauser shroud, as there is zero chance of finding a replacement.
Instead, I want to convert the K98 system to function in the Siamese bolt. The K98 shroud and my 3 position safety fit the Siamese bolt, BUT the tip of the K98 firing pin is about 1mm short and does not protrude out of the bolt face.
I have ordered a couple of 2.5mm carbide drills from Aliexpress. The plan is to cut off the current K98 tip and then drill a socket with the carbide drill, without needing to modify the heat treatment. Then use a 2.5mm high speed drill shank to create the new tip.
Time will tell how robust this modification is.