130 gr 308

I use that bullet with a 1-10” twist. It happens to be the most accurate bullet I’ve tried in my .308.
I was turned on to this bullet by a friend from the range who has used it in his .308 and shot thru several cow elk with it.
 
I have to re-barrel a rem 700 243. I think I am going to change it to a 308.

If I would like to shoot the 130 gr Barnes TTSX what twist would be best?

Any input would be appreciated.
@Jamie D Van Roekel
The usual twist is 1 in 10 but if you are going to use the 130ttsx or only up to a 165gn a 1 in 11 twist may be even better.
Bob
 
That light and short of a bullet will work with most twist rates. You may want to just buy a 10” twist in case you want to shoot 180s or heavier down the road. What is making you want to shoot the 130s? Heck that light of a bullet might be better served by the mighty 260 creedmoor. For the record I own 308s and creedmoors. all of them shoot critters dead.
 
Oh, coincidence I posted below Bob? The creedmoor is his second favorite cartridge!
@Two Tracks
You are 100% correct mate the 6.5 crudmore/ manbun is my second favourite cartridge, TO HATE.
Bob
 
I have used a 130 grain X bullet on two large muley bucks from my 300 Sav bolt with 1:12 twist. Nice little combo. One bullet exited chest at 250yrds the other stuck if off shoulder at about 110 yards.................good luck................FWB
 
+1 for .284. Very overlooked but an amazing cartridge
284 in a short action is very limited on bullet choices to meet 2.8” mag length. Yes, I have one. Nosler partitions will work seated deep, 145 Speer Grand Slam (junk) works, 140 gr Woodleigh and some of the light Hammer bullets will work. Forget about anything pointy!
 

Forum statistics

Threads
68,312
Messages
1,518,669
Members
152,385
Latest member
MarlysCarb
 

 

 

Latest posts

Latest profile posts

I have not posted any items for sale on this forum and will not every put anything for sale. My account was hacked and I've worked with the admin to get things shut down.
Paul K wrote on cgdemakis's profile.
Paul
CJNJ wrote on UNTAMED KNIVES's profile.
Still possible to order one of these?
ghay wrote on Floridanative's profile.
Hello,
I might be able to help you out depending on how many you need. I could probably spare 50-75 .285g A-Frames. They are factory pulls that look like new. Let me know if you are still looking,
Thanks,
Gary
blackdog001blackdog001 wrote on Snowball's profile.
Hi. I can take 5 boxes at $200 shipped if interested. Thanks
 
Top