458 Win & 404 Grain Shock Hammer

jwp475

AH enthusiast
Joined
Jul 7, 2021
Messages
398
Reaction score
745
404 grain Shock Hammer is now being served
COAL 3.383" 2523 FPs

20220829-171302.jpg
 
Last edited by a moderator:
What’s the difference between the Shock Hammer and the Claw Hammer ? I wish they made these in 450Gr weight. Would have a sectional density that agrees with me more.
There are several factors that mean more than SD as to penetration
These 404 grain Shock Hammers penetrate very well in testing.
 
There are several factors that mean more than SD as to penetration
These 404 grain Shock Hammers penetrate very well in testing.
Would you happen to know the difference between Hammer brand’s Claw Hammer and Shock Hammer bullets? I always get confused.
 
@jwp475 would you mind sharing your load data via a PM?

Norma cases, federal 215 primers, 85 grains of AA2230 @ COAL of 3.3830" which is as long as I can get in the magazine. This load is heavily compressed and very likely to be over the SAAMA MAP pressure of 62,000 PSI.
 
Yes, 450 Grain Bullets for the 458 Winni is that what makes me real hot for this cartridge. Easy brass, easy reloading and equipment, normal sized action, easy recoil, handable rIfle weight and so on. In combination with 350 grainers for plainsgame, the good old .458 is versatile like rubber boots in great britain.
The biggest enemy of that .458 was the introduction with 500 grainers trying to copy or even beat the 450NE and 470 NE.
For that 500 grain bullets (leadfree bullets even need more space) the 458 Win shell is in my opinion toooo short.
I think thats why the Lott came up and did it right !!
 

Forum statistics

Threads
64,497
Messages
1,420,410
Members
130,707
Latest member
LethaTucke
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top