CLR

Dr Ray

AH legend
Joined
Apr 1, 2017
Messages
4,291
Reaction score
6,509
Location
Cairns, Australia
Media
53
Articles
5
Hunting reports
Australia/NZ
7
Member of
Sporting Shooters Association of Australia + CRM Gunsports (Cairns)
I MIGHT use CLR solution to clean any carbon or gunk out of my stainless steel barrels.

Question:

Has anyone used CLR in non-s/steel barrels and if so, what were the results?

I'd like to use CLR in a lever action
 
Very interesting, I’ve never heard of it used for that.
Me either.
We use CLR for cleaning toilets.
I stick to less caustic stuff for firearms.
 
I MIGHT use CLR solution to clean any carbon or gunk out of my stainless steel barrels.

Question:

Has anyone used CLR in non-s/steel barrels and if so, what were the results?

I'd like to use CLR in a lever action
@Dr Ray
I use brake kleen to remove carbon from both my stainless and chrome moly barrels.
Bob
 
I see. Thank you
 
Please disregard anything anyone tells you about steel if they are completely ignorant about what steel is. By definition ALL steel contains Fe (iron) with carbon, that's what steel is. High carbon, low carbon, alloy, stainless. Hardenability depends on carbon.

Low carbon steel (mild steel) contains between 0.05% to 0.25% carbon. High carbon steels contain 0.30% to 2.00% carbon. Above that and you have cast iron.

"Alloy steels" have various other stuff mixed in generally to enhance certain properties such as tensile strength. "Stainless steels" are a class of alloy steels that contain a minimum of 11% chromium, it still contains carbon

4140 Chrome Moly:
C​
Cr​
Mn​
Si​
Mo​
S​
P​
Fe​
0.38-.43%​
0.80-1.10%​
0.75-1.0%​
0.15-0.30%​
0.15-0.25%​
0.040% max​
0.035% max​
Balance​

316 Stainless:
CarbonSiliconManganesePhosphorusSulphurNickelChromiumMolybdenumNitrogen
316
Specification (max)​
0.080.752.000.0450.03010.00 – 14.0016.00 – 18.002.00 – 3.000.10

Without knowing the particulars, I would be cautious about using CLR as it is probably (my guess only) aqueous based and as such a corrosion risk. Even "stainless" steels are vulnerable to corrosion.
 
For carbon removal you might try some Quicksilver Power Tune from Mercury Marine.

I've used it to remove carbon deposits on diesel and gas engines with no problems.


.
 

Attachments

  • Screen Shot 2020-11-28 at 5.43.57 AM.png
    Screen Shot 2020-11-28 at 5.43.57 AM.png
    1.2 MB · Views: 194
  • Screen Shot 2020-11-28 at 5.43.59 AM.png
    Screen Shot 2020-11-28 at 5.43.59 AM.png
    644.6 KB · Views: 231
  • Screen Shot 2020-11-28 at 5.44.01 AM.png
    Screen Shot 2020-11-28 at 5.44.01 AM.png
    465.8 KB · Views: 214
Last edited by a moderator:
I thought I’d just run patch through until clear
Then use bore eliminator or Hoppes
 
Last edited:
you might have saved a gunsmith and a barrel maker from eating better than previously,
bruce.
 
I was going to clean barrels tomorrow but the rain is coming in and I don’t want moisture getting into gunsafe. I’ll clean next weekend.
Then I’ll report.
 

Forum statistics

Threads
61,434
Messages
1,344,604
Members
115,665
Latest member
noxproxyusr
 

 

 

Latest posts

Latest profile posts

buckstix wrote on teklanika_ray's profile.
HERE IS WHAT I AM SENDING TO YOU TOMORROW - SEE TRACKING


SOME OF THESE ARE NEVER FOUND FOR SALE "ANYWHERE" BECAUSE THEY ARE SO RARE :)
15-RARE-CARTRIDGES.jpg
Hunted:
USA:
AK, CO, IA, KS, MN, MO, MT, NE, NM, SD, UT, WI, WY
Canada: Manitoba, Saskatchewan
International: Scotland, Limpopo South Africa
Franco wrote on rnovi's profile.
Here's the target for the NorthForks - 25yds off a bag, iron sights. Hunting leopards over dogs the range won't be more than that.

Flew in an airshow in Smyrna years ago, beautiful country.

Best regards,

Franco

IMG_1476.jpeg
 
Top