For Sale Blaser R8 .404 Jeffery Barrel, Insert & Bolt Head

OMG - Had not noticed that ......... :oops: !! I suppose a line through would be inappropriate. :unsure: Hopefully the barrel maker was better at his trade than his spelling.
Just hope SAPS doesn't compare your ammo to the barrel markings. If so, it may be easier to file off the Jeffery from your case heads. Lol!
 
Just hope SAPS doesn't compare your ammo to the barrel markings. If so, it may be easier to file off the Jeffery from your case heads. Lol!
Check the spelling ---- in JB, Beira, Lusaka, or Harare? Suspect I could risk that one.
 
I have for sale a custom .404 Jeffery barrel for the Blaser R8. I got it in the white from Elmer Laitala just before he retired, and sent it to Jim Brockman for sights, recessed muzzle crown and finishing. It is 24”, 14 twist, 17mm at the muzzle. Sights are zeroed at 50 yards. The contour is slightly heavier than Blaser standard. In my Professional stock, the barrel is in contact with the fore stock, not free float. This does not affect accuracy as you can see from the test targets. There is a small ding at the muzzle, not near the crown; can be seen in one of the pics. Included is the correct Blaser magazine insert and Blaser “UM” bolt head. $1300. PayPal discreet preferred. I also have 10 or so boxes of .404 ammo I’ll be posting here in a few days, but want to give dibs to the buyer of the barrel; buyer will get a discount on ammo.

View attachment 395688View attachment 395689View attachment 395690
FIRST TWO TARGETS AT 50 YDS:

View attachment 395692View attachment 395693
LAST TARGET IS NORMA 450 GRAIN RNSN AT 100 YDS:

View attachment 395694
Available?
 
Sold in 2021.
 

Forum statistics

Threads
64,577
Messages
1,422,220
Members
131,131
Latest member
JadaRichie
 

 

 

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top