Rifle Scope Combination Problem

In my opinion, the problem isn't your hardware, its your technique. What you're doing is suitable for small to medium actions and in particular pushfeed actions. Dangerous to use with magnum length, mauser style controlled feed actions. (remember, unlike a pushfeed, a controlled feed doesn't eject until the very end of the stroke). You should use a underhand grip and hence your thumb is nowhere near the bolt when extracting. Using a short action/pushfeed technique has two problems: One your thumb/fingers hit the scope/mount and two it makes short stroking highly likely especially under stress. The Fieldsports Channel have a video on proper technique as taught in the Southern Africa Wildlife College PH course. Give it a try.

 
Last edited by a moderator:
I just received the bolt back from Wayne. Very fast turn-around and Wayne was a pleasure to deal with. Nice work too:

20190408_172622.jpg
20190408_172505 (1).jpg
20190408_172535 (1).jpg
20190408_172443 (1).jpg


It works much better! Just enough room for my knuckle too. Better yet, I don't have to modify the stock! Anyway, my technique has changed a little thanks to this post too. Thanks to the help of everyone!
 

Forum statistics

Threads
68,619
Messages
1,526,739
Members
155,397
Latest member
ElkeRosenh
 

 

 

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top