Pay It Forward-Free

[Monsai52]

PM me your Info

PM sent. I'll post something suitable to pay forward.

Best regards,

 

[Hyde Hunter]

View attachment 458572
View attachment 458573View attachment 458574
Here’s some items:
1. 1” steel black rings NIB for a CZ550/555 rifle.
2. 1” new dark gray Ruger rings.
3. One piece base with screws that came off an Interarms Model X .375 H&H rifle.
4. Adjustable nylon rifle sling.

Hope someone can put these items to good use!

Scott I would like the CZ550 Rings if they are still available

 

[Hyde Hunter]

I also just found these up for grabs: one Warne #7650 20 moa base rail fits Howa and Weatherby short actions new in package, also one Leupold #51734 matt long range base fits Remington 700 RH short action new in package, thanks Jim

 

[45bthompson]

I could use that rem 700 base.

 

[Scott CWO]

Scott I would like the CZ550 Rings if they are still available

Sure! Send a pm with address.

 

[Hyde Hunter]

I could use that rem 700 base.

you got it send me a pm and I will send it out thanks

 

[Hyde Hunter]

oops, forgot to mention the Warne base is for the Weatherby Vanguard

 

[45bthompson]

I am paying it forward with a new Otis 556 cleaning kit.

 

[Hyde Hunter]

Rem 700 base going to 45bthompson tomorrow

 

[Rob404]

If the 7mm brass is available I,ll grab it Thanks

Brass received, thanks

 

[Woodcarver]

@TNDave The rings and bases showed up today. Thanks again!

 

[Hogpatrol]

20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

 

[meigsbucks]

The rings arrived yesterday. Thanks again TNDave.

 

[Woodcarver]

20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

Ok, I'll risk showing ignorance...Is there significance in "Practical". What caliber would these be?

 

[Wishfulthinker580]

Ok, I'll risk showing ignorance...Is there significance in "Practical". What caliber would these be?

I may be wrong but I believe it’s a 223 Remington necked down to 204

 

[Hogpatrol]

I may be wrong but I believe it’s a 223 Remington necked down to 204

Yes, .223 Remington cartridge necked down to .20 caliber.

 

[Hogpatrol]

20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

Snagged.

 

[Ridge Runner]

I am placing these up Hornady 270 bullets full box, and a partial box of Speer 270 bullets.

 

[Hyde Hunter]

They are yours!

PM me your address and I’ll get them out to you

dies arrived today thanks Dave

 

[Monsai52]

To pay forward, I'm offering 1 full and one 1/2 box (75 total) .308, 168gr Nosler Ballistic Tips.

Best regards,