Pay It Forward-Free

Monsai52 · Mar 23, 2022

Rob404 said:
PM me your Info

PM sent. I'll post something suitable to pay forward.

Best regards,

Hyde Hunter · Mar 23, 2022

Scott CWO said:
View attachment 458572
View attachment 458573 View attachment 458574
Here’s some items:
1. 1” steel black rings NIB for a CZ550/555 rifle.
2. 1” new dark gray Ruger rings.
3. One piece base with screws that came off an Interarms Model X .375 H&H rifle.
4. Adjustable nylon rifle sling.

Hope someone can put these items to good use!

Scott I would like the CZ550 Rings if they are still available

Hyde Hunter · Mar 23, 2022

I also just found these up for grabs: one Warne #7650 20 moa base rail fits Howa and Weatherby short actions new in package, also one Leupold #51734 matt long range base fits Remington 700 RH short action new in package, thanks Jim

45bthompson · Mar 23, 2022

I could use that rem 700 base.

Scott CWO · Mar 23, 2022

Scott I would like the CZ550 Rings if they are still available

Sure! Send a pm with address.

Hyde Hunter · Mar 23, 2022

45bthompson said:
I could use that rem 700 base.

you got it send me a pm and I will send it out thanks

Hyde Hunter · Mar 23, 2022

oops, forgot to mention the Warne base is for the Weatherby Vanguard

45bthompson · Mar 23, 2022

I am paying it forward with a new Otis 556 cleaning kit.

Hyde Hunter · Mar 23, 2022

Rem 700 base going to 45bthompson tomorrow

Rob404 · Mar 23, 2022

Rob404 said:
If the 7mm brass is available I,ll grab it Thanks

Brass received, thanks

Woodcarver · Mar 25, 2022

@TNDave The rings and bases showed up today. Thanks again!

Hogpatrol · Mar 25, 2022

20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

meigsbucks · Mar 25, 2022

The rings arrived yesterday. Thanks again TNDave.

Woodcarver · Mar 25, 2022

Hogpatrol said:
20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

Ok, I'll risk showing ignorance...Is there significance in "Practical". What caliber would these be?

Wishfulthinker580 · Mar 25, 2022

Woodcarver said:
Ok, I'll risk showing ignorance...Is there significance in "Practical". What caliber would these be?

I may be wrong but I believe it’s a 223 Remington necked down to 204

Hogpatrol · Mar 25, 2022

Wishfulthinker580 said:
I may be wrong but I believe it’s a 223 Remington necked down to 204

Yes, .223 Remington cartridge necked down to .20 caliber.

Hogpatrol · Mar 25, 2022

Hogpatrol said:
20 Practical brass. I hate to throw these in the scrap bucket. They've all been done in four steps, once through a small base die, two times through a full length Redding S type die and then a final neck down in a Redding bushing neck die then trimmed, inside and outside neck chamfered and primer pockets done. Posted on other sites. Time stamp prevails.

Snagged.