Need a Vault Door

Paul G

AH enthusiast
Joined
Dec 16, 2019
Messages
324
Reaction score
332
Location
Park City, UT
Media
1
Hunted
Namibia, RSA
I am looking to buy a new Vault door for a new house build with a gun safe room. I'm open to buying a used one in good shape or find a deal on a new one. I can call all around and find the best deal worst case, but prefer to buy it from someone who also hunts or can use a quick easy sale. I'm in SLC, have done a fair amount of research, but any 2 cents of advice is also appreciated.
 
As vault doors are typically a permanent installation, unless some one bought one and then didn't build, you're probably better off looking to buy new.
These guys make an excellent safe. Had this link saved for my future need:

Be sure to overbuild. Just like safes, vaults built for current needs will usually be too small too soon... :cool:
 

Attachments

  • Screen Shot 2022-02-14 at 9.50.27 AM.png
    Screen Shot 2022-02-14 at 9.50.27 AM.png
    1.5 MB · Views: 136
Try Google. Good luck. Safe companies do sell a door for same. Would you like GPS coordinates for the best examples?
 
Last edited:
Browning made a great one a few years ago. Maybe they still do.
 
I bought one from Fort Knox. I believe that they are right there in Utah where you are. Shop carefully, some that look nice and are more reasonably priced are much lighter weight steel and use less positive lockup. Fort Knox was one of the best when I bought mine. We used an in-swing door as the gun vault doubles as our storm shelter.

Get the RO right. My builder messed mine up and it was a major job correcting it.
 
Antignos, you have several options to choose from. ProSteel in UT and Smith Security in Ohio. Shipping costs might weigh in on your decision. Here is the link to Smith Security
 

Attachments

  • Screen Shot 2022-02-14 at 9.51.01 AM.png
    Screen Shot 2022-02-14 at 9.51.01 AM.png
    868.2 KB · Views: 136
  • Screen Shot 2022-02-14 at 9.51.03 AM.png
    Screen Shot 2022-02-14 at 9.51.03 AM.png
    1.5 MB · Views: 134
  • Screen Shot 2022-02-14 at 9.51.05 AM.png
    Screen Shot 2022-02-14 at 9.51.05 AM.png
    1.9 MB · Views: 127
  • Screen Shot 2022-02-14 at 9.51.11 AM.png
    Screen Shot 2022-02-14 at 9.51.11 AM.png
    1.4 MB · Views: 120
  • Screen Shot 2022-02-14 at 9.51.15 AM.png
    Screen Shot 2022-02-14 at 9.51.15 AM.png
    773.4 KB · Views: 127

Attachments

  • Screen Shot 2022-02-14 at 9.52.32 AM.png
    Screen Shot 2022-02-14 at 9.52.32 AM.png
    1.1 MB · Views: 143
  • Screen Shot 2022-02-14 at 9.52.34 AM.png
    Screen Shot 2022-02-14 at 9.52.34 AM.png
    1.5 MB · Views: 140
  • Screen Shot 2022-02-14 at 9.52.36 AM.png
    Screen Shot 2022-02-14 at 9.52.36 AM.png
    1.6 MB · Views: 133
  • Screen Shot 2022-02-14 at 9.52.39 AM.png
    Screen Shot 2022-02-14 at 9.52.39 AM.png
    1.3 MB · Views: 155
I bought an insulated, 6 dead bolt, steel fire/security door and made a secure room by fortifying a large closet in my gun room. The walls are rokwool insulated with expanded metal and multiple layers of sheet rock. Not a 'Vault' but it would take someone quite a while to break into it. I can also use it as a safe room, if ever needed.
 

This is the company I had build my vault door, I did a ton of research and talked to a lot of companies, they stood out to me and I love my door.

I did 3/16 stainless upgrade and then I added an additional layer around both locks and along the closing edge. I also had hard plates added in places on the inside.
 

Attachments

  • Screen Shot 2022-02-15 at 6.57.00 PM.png
    Screen Shot 2022-02-15 at 6.57.00 PM.png
    2.6 MB · Views: 144
  • Screen Shot 2022-02-15 at 6.57.02 PM.png
    Screen Shot 2022-02-15 at 6.57.02 PM.png
    773.8 KB · Views: 133
I am looking to buy a new Vault door for a new house build with a gun safe room. I'm open to buying a used one in good shape or find a deal on a new one. I can call all around and find the best deal worst case, but prefer to buy it from someone who also hunts or can use a quick easy sale. I'm in SLC, have done a fair amount of research, but any 2 cents of advice is also appreciated.
Some are actually built right there in Utah
 

This is the company I had build my vault door, I did a ton of research and talked to a lot of companies, they stood out to me and I love my door.

I did 3/16 stainless upgrade and then I added an additional layer around both locks and along the closing edge. I also had hard plates added in places on the inside.
I second sturdy safe. I did a lot of research before I bought my traditional safe and decided to use them. I have been extremely happy. It is amazing how big of a gap some safe companies will tolerate between the closed door and the frame. I can barely get the tip of a normal screwdriver into the largest gap in my safe. Most safes I see in big box stores (Liberty, etc) you could easily fit a pry bar or wrecking bar into.
 

This is the direction I went. They are in Utah, which I believe is where the OP is. I purchased mine about seven years ago. It looks like the price is up about 40% over what I paid.
 

Attachments

  • Screen Shot 2022-02-16 at 9.18.39 AM.png
    Screen Shot 2022-02-16 at 9.18.39 AM.png
    1.5 MB · Views: 129
  • Screen Shot 2022-02-16 at 9.18.41 AM.png
    Screen Shot 2022-02-16 at 9.18.41 AM.png
    3.6 MB · Views: 147
  • Screen Shot 2022-02-16 at 9.18.44 AM.png
    Screen Shot 2022-02-16 at 9.18.44 AM.png
    1.9 MB · Views: 157
  • Screen Shot 2022-02-16 at 9.18.46 AM.png
    Screen Shot 2022-02-16 at 9.18.46 AM.png
    1.6 MB · Views: 142
There was a vault door in the midwest on FB marketplace “Free if you haul it away”. It was gorgeous, pulled form the historic Rookery building in Chicago. (Where Capone had his offices)

It may still be around, you may sleuth where it went and see if the recipient wants to sell it If no longer free.
 
  • Like
Reactions: WAB
Definitely consider if you want an in-swing door. There is the risk of being trapped inside if you have an outswing door and something blocks the door outside to keep it from opening.
 
Definitely consider if you want an in-swing door. There is the risk of being trapped inside if you have an outswing door and something blocks the door outside to keep it from opening.

Actually never considered that. Thanks for the tip!
 
Actually never considered that. Thanks for the tip!

That’s why I mentioned that ours is an in-swing. Our vault does double duty as a storm shelter. If the house comes down in a storm you’re not getting out afterward with an out-swing door.
 
That’s why I mentioned that ours is an in-swing. Our vault does double duty as a storm shelter. If the house comes down in a storm you’re not getting out afterward with an out-swing door.

I did the same, and if you are custom ordering it, I can't think of a reason not to.
 

Forum statistics

Threads
68,677
Messages
1,528,077
Members
156,041
Latest member
AlfonzoCat
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top