9.3x62 load

1st they take away my precious Winchester Silvertip .
Then , they take away my RWS T Mantel .
I feel so out dated .

On a more serious note , in that case ... I will recommend the 286 grain Norma Orynx soft point cartridges.
Friend Ponton
I to lament the loss of the silver tip.
I've never used it in the grand old 375 but used xxx thousands of them in a model 94 Winchester 30/30 on pigs and goats. Absolutely devastating.
Cheers my friend
Bob Nelson
 
Friend Ponton
I to lament the loss of the silver tip.
I've never used it in the grand old 375 but used xxx thousands of them in a model 94 Winchester 30/30 on pigs and goats. Absolutely devastating.
Cheers my friend
Bob Nelson
I indeed miss them very much , Bob. The .375 Holland & Holland magnum calibre Winchester 300 grain Silvertip soft point cartridges were so damned effective on royal Bengal tiger and panthers , that we local Indian shikarees used to nick name them " Baagh guli " ( Tiger Bullets ) .
The .30-30 Winchester variant was just the medicine for forest panthers .
 
1st they take away my precious Winchester Silvertip .
Then , they take away my RWS T Mantel .
I feel so out dated .

The 286 gr RWS T-Mantel is still available as a reloading component.

How many do you need?

;)


HWL
 
Just tried a load with 250 grain accubond. 62 gr of RL15 gave me 2,575 fps. Starting to think the barrel on the sauer ain't gonna let me break 2,600 fps lol. Groups were plenty good for my hunting needs, but gonna try to tighten them up a bit.
20200308_181353.jpg
20200308_181348.jpg
 
Last edited by a moderator:
Then a 5 shot group with the Norma PH 230 gr ecostrike. This factory loads clocks 2,623 fps, and I'm starting to doubt I'll be able to match thos factory load lol.
20200308_182823.jpg
 
Last edited by a moderator:
I get my best results with my CZ 550 9.3 x 62 at 100 yds:
Barnes 250 gr TSX and 60 gr of 4064.
Barnes 286 gr TSX and 53 gr of 4064.
Don't know what the mv is but I lucked out and got a cloverleaf with both the other day. My other groups were 1.5"to 2". Good enough for me for a hunter. This is my "except for buf and ele" gun. I have my King of Rifles for them.
 
Just tried a load with 250 grain accubond. 62 gr of RL15 gave me 2,575 fps. Starting to think the barrel on the sauer ain't gonna let me break 2,600 fps lol. Groups were plenty good for my hunting needs, but gonna try to tighten them up a bit. View attachment 334468View attachment 334469
Cleveland 48 you could always try a different powder like Varget or Hogdon CFE223.
Cheers
Bob Nelson
 
Cleveland 48 you could always try a different powder like Varget or Hogdon CFE223.
Cheers
Bob Nelson
I've trying to find varget now Bob. It is apparently dried out locally. I do have my name on some list for when it does come in, which will hopefully be soon! CFE223 has not crossed my mind though. I'll try to look up some data on it, but I have seen some locally so it is available. Honestly 2575 fps would be plenty for me in my 22" barrel, but I like to tinker. Gonna try some seating depth test and see those groups will shrink some.
 
I've trying to find varget now Bob. It is apparently dried out locally. I do have my name on some list for when it does come in, which will hopefully be soon! CFE223 has not crossed my mind though. I'll try to look up some data on it, but I have seen some locally so it is available. Honestly 2575 fps would be plenty for me in my 22" barrel, but I like to tinker. Gonna try some seating depth test and see those groups will shrink some.
Cleveland 48
CFE 223 sits between Varget and H4350. I would start with your reloader 15 load and work up 1 grain at a time until you reach YOUR SAFE WORKING LOAD.
Load from a disc recommends a max of 65 grains of cfe223.
Cheers
Bob
 
Cleveland 48
CFE 223 sits between Varget and H4350. I would start with your reloader 15 load and work up 1 grain at a time until you reach YOUR SAFE WORKING LOAD.
Load from a disc recommends a max of 65 grains of cfe223.
Cheers
Bob
Thanks for the info Bob! I'll try to grab some this week.
 

Forum statistics

Threads
68,677
Messages
1,528,089
Members
156,043
Latest member
inzanabac1979
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top