500 Jeffery Club

I joined the club Saturday, shooting 4 rounds through mine. I’m not sure anything could survive a round from the .500j, my shoulder almost didn’t.
Idk if it gets better per-say & I haven't been to SA with it, yet. (More experienced members stories have been a joy). But when/if it becomes extinctive, controlled, measured .. it's magnificent.
 
That monograph/Special Issue of BASA JOURNAL SOUTH AFRICA was too big to fit on my scanner.
Too big to fit in a sheet protector until the top edge was sliced off.
Here is a better quality image made by using "Paint" on what I could fit on the scanner.
No scotch tape showing on the top of this one:

Image_20240326_0001.jpg
 
Here is a fantastic .500 Jeffery built by H&H, seen at the 2024 SCI Convention:

aa001.JPG
aa002.JPG
aa003.JPG
aa004.JPG
aa005.JPG
aa006.JPG
aa007.JPG
aa008.JPG
aa009.JPG
aa010.JPG
aa011.JPG
aa012.JPG
aa013.JPG
aa014.JPG
 
A German or rather an English cartridge, the author concluded that it was more likely a German one. That was the status in 1995, but there is nowadays a clear distinction between the cartridges 500 Jeffery and 12,7x70 Schüler.

Scannen 26.jpeg
caliber 6 Oktober 95 / November 95
 
That monograph/Special Issue of BASA JOURNAL SOUTH AFRICA was too big to fit on my scanner.
Too big to fit in a sheet protector until the top edge was sliced off.
Here is a better quality image made by using "Paint" on what I could fit on the scanner.
No scotch tape showing on the top of this one:

View attachment 595741



Does anyone have a spare hard copy of this magazine they would be willing to sell? I have been trying to find one for awhile. Thanks!
 
That monograph/Special Issue of BASA JOURNAL SOUTH AFRICA was too big to fit on my scanner.
Too big to fit in a sheet protector until the top edge was sliced off.
Here is a better quality image made by using "Paint" on what I could fit on the scanner.
No scotch tape showing on the top of this one:

View attachment 595741
Or….just put a well constructed 7mm solid through his brain. Lol!
 
I agree :) I got my 500 Jeffery for pure knockdown power, but placement is soo important. It's an old joke. My friend bought a 9mm (i shoot 45 and 45 Super). I told him if I want to make someone angry, I'll just insult them :)
If you care to share, have you ever used the 500 on Bear?
 
I haven't I got this bear with my Rem XCR II (stainless/TryNyte finish) in 375 H&H with a 300g A-Frame at 13 yards. Hit him perfectly but he stood up, took off into the brush and roared for like 3 minuutes. Went in after him and found him dead on the trail waiting for us. I hear sometimes they go bang flop when hit with a 30-06. Regardless, next time I'm bringing the 500.

5NwQ1PZ.jpg


zyJbAZc.jpg
 
Posted before. Idk, however .. Kynoch-Norma-Jamison-Bertram
View attachment 595798

Anyone who buys nowadays a rifle caliber 500 Jeffery should pay attention to which cartridge it is intended for and then also pay attention to the ammunition. No problem with the new rifles, but perhaps with the used. The cartridges 500 Jeffery and 12,7 x70 Schüler are not always interchangeable.
 
Anyone who buys nowadays a rifle caliber 500 Jeffery should pay attention to which cartridge it is intended for and then also pay attention to the ammunition. No problem with the new rifles, but perhaps with the used. The cartridges 500 Jeffery and 12,7 x70 Schüler are not always interchangeable.
Correct there are 3 chamber.dimensions....I own the one that can take all 3...
 
Now the question to the honorable members of the club: Who has what ?

My rifle built in 1998 has a chamber for the Romey Hybrid cartridge. In addition to the rifle I got the ammunition from W.Romey and brass from Horneber. With that I have what I need for reloading. Fortunately the barrel diameters are the same.
 

Forum statistics

Threads
62,719
Messages
1,377,552
Members
120,896
Latest member
RubyeVacho
 

 

 

Latest profile posts

DaBill wrote on liam375's profile.
This is Bill from Arizona. If you still have the DRT's I would like to have 3 boxes
Let me know about pmt.
Thanks
teklanika_ray wrote on SP3654's profile.
I bought a great deal of the brass he had for sale, plus I already had many hundred rounds.

How much brass are you looking for?

Ray H
DaBill wrote on Green Chile's profile.
Hi Green Chile, I just recently bought a 470 NE barrel for my Thompson Center TCR 83-87 single shot. Im just looking for some 470 NE to shoot at the range just to try it out. I dont need anything special but I just wanted to see what you have left. I dont necessarily even need a full box.
Thanks
Bill
Harleydav wrote on raamw's profile.
Hello Do you still have 50 new 458 win mag brass for sale and are they hornady ?
 
Top