World's most popular community & resource for hunting in Africa since 2007
.458 Express
- Thread starter peras
- Start date
PaulT
AH elite
The gunsmith started work on a .458 express Im building.This will be a long six months!
Is the .458 express a full 3" case ?
peras
AH elite
Some guys actually calls it the .458 three inch.To be precise it is actually 2.99 and takes about 8 grains more powder than the lott.
PaulT
AH elite
A buddy of mine contemplated putting one together.
(it never got done)
Inexpensive 3" cylinder brass was available in large lots, making reloading cheap and avoiding time consuming and meanial case trimming work.
8 more grains capacity over the 458 Lott cartridge gives you a formidable round.
Good luck with the build.
(it never got done)
Inexpensive 3" cylinder brass was available in large lots, making reloading cheap and avoiding time consuming and meanial case trimming work.
8 more grains capacity over the 458 Lott cartridge gives you a formidable round.
Good luck with the build.
Members online
- farrokhrt
- steve white
- coyote wacker
- Mountainshadows
- Miletic
- Mekaniks
- samson7x
- ITW
- contender85
- CurtisDees
- APB
- JHT
- Rare Breed
- ozarkrambler
- Nhoro
- tkatzzz
- moonrunner02
- wesheltonj
- Trophyhunter01
- Aardwolf
- Tbitty
- Tanks
- Beck
- Milo
- LimbNoMo
- dogcat1
- Clark8907
- Atticus
- VertigoBE
- Floridanative
- John the Electrician
- Niklas
- Justbryan
- Mtelksports
- eyedok
- John Wasmuth
- grand veneur
- teklanika_ray
- EatonCanyon
- LuikoBM
- autofire
- raamw
- Lopehunter
- Riksa
- Philippe
- Matabele
- Mark Clark
- Hornedfrogbbq
- TXTad
- RIGBY
Forum statistics
Latest profile posts
buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..
I will take a set .. I would take more than one set if you have more.
BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
I will take a set .. I would take more than one set if you have more.
BUCK STIX - PO BOX 3 - NEENAH WI 54957-0003
920-450-0723
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
