450/400 3" bullet diameter?

Bore diameters on the very early ones (including the 3-1/4" NE version and the 2-3/8" BPE) varied widely; I seem to remember reading that they ranged from .408" to .411" or possibly .412" but as 318AE mentioned above, Ruger standardized their bores at .410" for their No.1 rifle. The 3" NE version should be .410-411" but as mentioned above, the only way to know for certain is to slug the bore. On my vintage Jeffery the bore slugs at .411" but it is plenty accurate with the more commonly-available .410" bullets.

You should be OK with .410" on your Ruger though.
 
Well, im pretty happy. Got the #1, used 400gr hornady DGS bullets, Hornady cases and dies, and H1000 powder ( only powder on hornadys list i could find..or find easly... I did find some N160/165 but at 8# tgey were over 400bucks..so I passed. H4831sc was listed so I have a pound of that comming in a couple weeks also picked up more h4350 because I ran slap out ).
In any event, using hornady 11th ed app data and hornady components.. I was very pleased with the results. Only thing I didnt have was federal 215 primers. Used wolf mlrp. ( i believe these are murom? )
Ive had excellent results with them even with large charges of ball powders in cold weather.
Shooting from a standing position, no stick or rest, 75 yards using the flip up leaf sight this was my first shot. pretty happy with it. The rest of my ladder test performed similarly. I experimented between about 1800fps and 2000.
Daylight was ending and rain started so I packed up fast/early.. but my target can be re-used by covering the center..so im.pretty happy with the results. Just showing off my very first shot.
1000011749.jpg

1000011772.jpg
 

Forum statistics

Threads
63,500
Messages
1,396,976
Members
124,495
Latest member
FallonFvp
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top