Can hair be removed from a tanned skin?

Ridgewalker

Lifetime bronze benefactor
AH ambassador
Joined
Aug 8, 2016
Messages
7,777
Reaction score
10,313
Location
Colorado
Media
251
Hunting reports
Africa
3
USA/Canada
4
Hunted
South Africa: Limpopo, Northwest; USA: Ak, Mt, Wy, Co, Ne, Ks, Nv, NM, Tx
My buffalo backskin came in with the hair still on. I wrote for the hair to be remove, but it wasn’t. That’s apparently Africa.
But, I want to make a cartridge belt and regular belts out of it. So can the hair be removed now that it is tanned?
Thanks for any help!
 
I'm certainly no expert, but I would think you could shave it, if nothing else
 
I have never tried to remove hair from a hide that has already been tanned, but I think it would be a tough go to get the end result you have pictured in your mind. When you pull hair on a raw hide you are pulling hair out at a certain stage of decomposition by the follicle. Being tanned hair on has essentially neutralized this process before the hide could reach this level of decomposition. If you were to shave it; all of the follicles would remain in the hide. I don’t know how a feller would go about that. Post pictures if you find a way that works. I’m curious too.
 
Basic answer- NO, at least not what you are looking for. There are two different processes to get tanned skins, with hair on and the 'leather" you seek. The hair is basically rotted off in the hairless method before/during the tanning process. It takes longer and is generally more expensive process. Even if you removed the hair with other techniques now, it will probably never been the leather you are wanting.
BTW, a small torch will burn off the existing hair (if you can stomach the smell :D )
 
BTW, a small torch will burn off the existing hair (if you can stomach the smell :D )
Maybe a windy day would help? Just stay up wind!:ROFLMAO::)
 
My buffalo backskin came in with the hair still on. I wrote for the hair to be remove, but it wasn’t. That’s apparently Africa.
But, I want to make a cartridge belt and regular belts out of it. So can the hair be removed now that it is tanned?
Thanks for any help!
So... HAIRY belts it is..
 

Forum statistics

Threads
64,497
Messages
1,420,406
Members
130,701
Latest member
GrolsnozAxops
 

 

 

Latest posts

Latest profile posts

bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top