Ruger Guide Gun 416

TOBY458

AH legend
Joined
Jan 23, 2014
Messages
4,433
Reaction score
12,623
Location
Madison Georgia, USA
Media
203
Articles
3
Hunting reports
Africa
6
Well......in a moment of weakness, after seeing Charlie Austin's buffalo pictures, I broke down and ordered a new Ruger Guide Gun in 416 Ruger. Budweiser and Gunbroker don't mix! .
To those who have this gun, what velocity are you getting in the 20" barrel with 400gr bullets?
 
You go Toby. You will love that rifle.
 
Toby, you can expect 2,250 fps with 400 grain bullets if you reload and 2,350 fps with Hornady factory loads (they use a proprietary powder not available to the public).

If you do reload, Alliant’s Reloder 15 is the powder of choice.
 
Toby, you can expect 2,250 fps with 400 grain bullets if you reload and 2,350 fps with Hornady factory loads (they use a proprietary powder not available to the public).

If you do reload, Alliant’s Reloder 15 is the powder of choice.
Thanks for the info! So basically I'll be shooting the equivalent of a 404 Jeffrey. I do reload, and have a couple of cans of RL15 on hand. It seems to work well for most bottle neck large medium bore rifles.
 
Thanks for the info! So basically I'll be shooting the equivalent of a 404 Jeffrey. It seem like I've read good things about such ballistics......:)

I have read posts by reloaders on this site that it is similar to the 450/400 in many aspects. Anyway it gets the job done.
 
Congrats on the new rifle, let us know how it shoots.
 
Thanks for the info! So basically I'll be shooting the equivalent of a 404 Jeffrey. I do reload, and have a couple of cans of RL15 on hand. It seems to work well for most bottle neck large medium bore rifles.

Congrats on the buy. I'm not sure how much you've worked with RL15 and so maybe you've already seen this. But RL15 has a reputation for significant lot to lot variability. I have developed loads with RL15 and in it's areas of use it is a great powder. The last load I developed I believe was for my son's .308 Win and it was a good load. But when I ran out of that can I went got a big jug of it and the same load did not give the same accuracy. I had to tweak with that load a bit. Don't remember exactly how much it differed, but it was more than 1/10th of a grain or so. More like off by 1-2gr from original load. So don't be surprised if you have to rework the load you developed using the now empty can. And to be safe, you should start a couple grains lower with a new can.

An alternative is using Hodgdon Varget which is pretty identical in burn rate. It has a better reputation for less lot to lot variation.
 
Good luck with the new rifle. I have the guide gun in 375 Ruger and just love it. Sweet handling accurate gun.
 
Congrats on the buy. I'm not sure how much you've worked with RL15 and so maybe you've already seen this. But RL15 has a reputation for significant lot to lot variability. I have developed loads with RL15 and in it's areas of use it is a great powder. The last load I developed I believe was for my son's .308 Win and it was a good load. But when I ran out of that can I went got a big jug of it and the same load did not give the same accuracy. I had to tweak with that load a bit. Don't remember exactly how much it differed, but it was more than 1/10th of a grain or so. More like off by 1-2gr from original load. So don't be surprised if you have to rework the load you developed using the now empty can. And to be safe, you should start a couple grains lower with a new can.

An alternative is using Hodgdon Varget which is pretty identical in burn rate. It has a better reputation for less lot to lot variation.
I happen to have some Varget too. Thanks so much for all the info!
 
Great round. I shot my first and only buffalo with a 416 Ruger Alaskan.
 
I have seen a lot of loads for the 375 ruger using reloader 17. Haven't seen any for the 416.
 
If you are a Swift bullet user, The Swift Reloading Manual Number 2 has several loads.
--------------------------------------------------------------------------------------------------------
Well......in a moment of weakness, after seeing Charlie Austin's buffalo pictures, I broke down and ordered a new Ruger Guide Gun in 416 Ruger. Budweiser and Gunbroker don't mix! .
To those who have this gun, what velocity are you getting in the 20" barrel with 400gr bullets?
 
I have the African with a 23" barrel and the best velocity you are likely to get will be with Alliant 2000-MR powder. Reloader 15 works but it is abut too fast to eek all the speed out of the cartridge that it's capable of. Using 2000-MR, I can push a monometal Barnes solid to 2300 FPS and a lead core to 2350. You'll lose some for the shorter barrel. It's a great cartridge. I can't wait till more reloading data is available for it.
 
I have the African with a 23" barrel and the best velocity you are likely to get will be with Alliant 2000-MR powder. Reloader 15 works but it is abut too fast to eek all the speed out of the cartridge that it's capable of. Using 2000-MR, I can push a monometal Barnes solid to 2300 FPS and a lead core to 2350. You'll lose some for the shorter barrel. It's a great cartridge. I can't wait till more reloading data is available for it.
Good info! I imagine the shorter barrel will lose around 75fps. The actual data I've seen with the 20" barrel shows around 2275 fps with lead core bullets.
 
375 Ruger fan thanks for sharing the article above.
 

Forum statistics

Threads
54,222
Messages
1,149,209
Members
93,820
Latest member
LydiaR8063
 

 

 

Latest profile posts

SETH RINGER wrote on Fatback's profile.
IF YOU DON'T COME UP WITH ANY .458, I WILL TRY AND GET MY KID TO PACK SOME UP FOR YOU BUT PROBABLY WOUDN'T BE TILL THIS WEEKEND AND GO OUT NEXT WEEK.
PURA VIDA, SETH
sgtsabai wrote on Sika98k's profile.
I'm unfortunately on a diet. Presently in VA hospital as Agent Orange finally caught up with me. Cancer and I no longer can speak. If all goes well I'll be out of here and back home in Thailand by end of July. Tough road but I'm a tough old guy. I'll make it that hunt.
sgtsabai wrote on Wyfox's profile.
Nice one there. I guided for mulies and elk for about 10 or so years in northern New Mexico.
sgtsabai wrote on Tanks's profile.
Business is the only way to fly. I'm headed to SA August 25. I'm hoping that business isn't an arm and a leg. If you don't mind, what airline and the cost for your trip. Mine will be convoluted. I'll be flying into the states to pick up my 416 Rigby as Thailand doesn't allow firearms (pay no attention to the daily shootings and killings) so I'll have 2 very long trips.
 
Top