What could you just not resist at DSC?

Congrats Paul, a proper rifle for you :D Cheers:
 
Inline,
“Talked to the sale rep about the Z8i 1-8+ the eye piece is extremely large”

So is it your impression his response was, he heard that request to reduce the bulk, and they are working on it. Or that they were not changing the size.

They should steal Leupolds design. The electronics are too large and cumbersome.
You guys with your large diameter, multi-feature rifle scopes are killing me.
(Bah Humbug):ROFLMAO:
 
Ladies & Gents,

The box lock double rifle shown in 3 photos attached below, is what I just could not resist, at the 2024 DSC Convention.
well done paul!

that is a very cool rifle, nicely balanced, in pristine condition. and yes you are right, kevin robertson seemed a very cool guy, was nice to meet him.

again a fine rifle and you are rightly proud of it. congrats.
 
Thanks Don,
When the weather finally eases up on us, let’s take it out for some plinking and plunking.
 
Ladies & Gents,

The box lock double rifle shown in 3 photos attached below, is what I just could not resist, at the 2024 DSC Convention.
I bought it from Francis Lombardi III, at his and his father’s DSC booth, “Collector’s Firearms Inc”, of New York, USA.
It was built by Franz Sodia of Ferlach Austria, in caliber .375 H&H (the standard belted magnum version).
It has 26” ejector barrels and although I bought it 2nd hand, it appears to have remained unfired since leaving the Maker’s shop.

There is dark grease on the breech face and on various other contours within the receiver, visible when the barrels are tilted open.
Refer to my last picture on your right.
Perhaps it was put there a long time ago as it appears to be drying out.

I expect solvent and a nylon scrub brush should remove it, no worries.
I’ve had good luck with lighter fluid for removing stubborn “cosmoline” from 1930’s and 40’s surplus military firearms.
No doubt there are better products available for this today.

Also, turning the top lever to open the rifle requires noticeably more effort than a used double should have.
Again, I suspect it was not fired except for proof testing and / or regulating by the Maker.
This rifle is not young though because the anti-recoil pad is becoming brittle with age.

Photos L to R:
1.
Myself holding the rifle.
2.
Dr. Kevin Robertson posing with it.
It is no surprise but he is a perfect gentleman, courteous, friendly and obviously possessed of a very bright mind.
3.
Close up of the receiver, showing the rose & scroll style engraving, as well as what appears to be vintage brown color packing grease, aka—> “cosmoline” on the breach face.

Cheers,
Velo Dog

View attachment 581217View attachment 581219View attachment 581221
Wow, nice double. I too had a chance to speak with Kevin and he is a very nice gentlemen. We spoke about his project with Rigby of trying to change the culture of what should be considered a true buffalo trophy....age not inches. He is obviously very passionate about this and has data and s science to support his convictions. I found his arguments compelling and it has changed the type of buffalo my son and I will look for this summer on our hunt in Zim.
 
I bought this lovely book at the show. I would not have noticed it if Maria had not shown it to me. I have decided my next buffalo hunt will be for a buffalo that will be honored in Volume 2.

Safe hunting

@SFRanger7GP - I agree. My conversation with Kevin Robertson at HSC has changed my mind on the type of buffalo I will be chasing this summer in Zim. I only hope we find something so old that I can submit it for the Volume 2 competition
 
Ladies & Gents,

The box lock double rifle shown in 3 photos attached below, is what I just could not resist, at the 2024 DSC Convention.
I bought it from Francis Lombardi III, at his and his father’s DSC booth, “Collector’s Firearms Inc”, of New York, USA.
It was built by Franz Sodia of Ferlach Austria, in caliber .375 H&H (the standard belted magnum version).
It has 26” ejector barrels and although I bought it 2nd hand, it appears to have remained unfired since leaving the Maker’s shop.

There is dark grease on the breech face and on various other contours within the receiver, visible when the barrels are tilted open.
Refer to my last picture on your right.
Perhaps it was put there a long time ago as it appears to be drying out.

I expect solvent and a nylon scrub brush should remove it, no worries.
I’ve had good luck with lighter fluid for removing stubborn “cosmoline” from 1930’s and 40’s surplus military firearms.
No doubt there are better products available for this today.

Also, turning the top lever to open the rifle requires noticeably more effort than a used double should have.
Again, I suspect it was not fired except for proof testing and / or regulating by the Maker.
This rifle is not young though because the anti-recoil pad is becoming brittle with age.

Photos L to R:
1.
Myself holding the rifle.
2.
Dr. Kevin Robertson posing with it.
It is no surprise but he is a perfect gentleman, courteous, friendly and obviously possessed of a very bright mind.
3.
Close up of the receiver, showing the rose & scroll style engraving, as well as what appears to be vintage brown color packing grease, aka—> “cosmoline” on the breach face.

Cheers,
Velo Dog

View attachment 581217View attachment 581219View attachment 581221
They sound like very respectful people to deal with.
Many congrats.
 
Ferlach apprenticeship is rigorous, the area standards are high, all the guns functional and often beyond lovely/embellished. Having said that, buying one is almost like getting a diamond. In the same way diamonds are so well graded that there really are no "bargains" so Ferlach guns are such that you get exactly what you pay for and no more. That goes for wood, engraving, everything. Top tier guns there can therefore be priced into the stratosphere WHEN NEW. The real bargains are on the used market, but to find one unfired--what a catch!
 
Last year I bought Turkish Walnut and this year I bought some of Bailey Bradshaw's time and skill to build a rifle using said walnut.

4 days in the booth adjacent to Bailey provided more temptation than I could resist!

IMG_3005.jpg
 

Forum statistics

Threads
54,652
Messages
1,159,965
Members
94,598
Latest member
kentcasinopcrHoracio
 

 

 

Latest posts

Latest profile posts

ghay wrote on gearguywb's profile.
Is this rifle sold? If not what is the weight of it and do you know if there is enough difference in diameter between the 35W and the 9.3 to allow for a rebore to a 9.3x62 which is what I am after?
Thanks,
Gary (Just down the road in Springfield)
Woods wrote on Hunter-Habib's profile.
Forgive me if this is the incorrect area, I signed up to this forum just now because I wanted to be on the list to purchase a copy of your autobiography. Please feel free to pass my information along to whomever is selling. Thank you so much. I look forward to it!
I like the Tillie in my picture. They are supposed to fit loose (2 fingers inside hat band), have mesh for cooling, and hold their shape after washing.
SSG Joe wrote on piratensafaris's profile.
From one newbie to another, Welcome aboard!
BLAAUWKRANTZ safaris wrote on Greylin's profile.
We have just completed a group hunt with guys from North Carolina, please feel free to contact the organizers of the group, Auburn at auburn@opextechnologies.com or Courtney at courtney@opextechnologies.com Please visit our website www.blaauwkrantz.com and email me at zanidixie@gmail.com
Zani
 
Top