ttsx in 375 caliber - i see nothing above 250 grains

I honestly think that most if not all of today's .375 bullets in the 270-300gr range kill as reliably as the latest zippety-doo-dah number being marketed as "the thing." I see no real need for a monolithic that opens up to 25 times its original diameter, just like I see no real need for a 350-grainer that will penetrate 10" of steel. If it lights your fire, by all means, but just my 2 cents. I'm way too aware of the power of marketing that goes on in the gun industry; as well as the corporate pressure placed on product managers to always come up with something new every single year, regardless of actual market needs. And I'm therefore mostly immune to it all (also because I'm somewhat of a Luddite).
 
Last edited:
Last edited:
Opens fine. Killed 9 animals with 300 gr Barnes in Zim last year.
IMG_5426.jpeg
 
Some may argue haveing a ph is more important than having a primary care physician

I plan on taking 270 and 300 grain loads on my next Buffalo hunt. Shooting two different buff with each load.
To be honest my 300tsx load shoots so well I am tempted to not mess with it.
Just really curious how the two bullets compare on the animal.
I can consistently ring 8 inch steel at 300 yards with my 300tsx load. But it does drop some.

My 385 H&H using a 300 gr Barnes traveling at 2475 gps at the muzzle drops 20 inches at 300 yards at 6000 ft elevation and sighted in dead on at 100 yards.
 
I'm not convinced you need 300 grains with a ttx bullet, and you would keep the velocity up higher. It will be long for weight in any case.
I would not lose sleep over using a 250 grain monometal, just sayin'.
 
I wouldn’t be concerned with a tax opening on any African animal, especially buffalo. I hit my buff with 2 different tsx shots and also solids. Both tsx shots were fairly close, one only 5-10 feet when I laid one in his shoulder right at the end. Both bullets recovered and opened perfectly. Here’s another


IMG_4983.jpeg
 
I've always wondered about the notion that the plastic tip helps initiate expansion in the TTSX. Plastic vs copper.....hmm?
 

Forum statistics

Threads
64,489
Messages
1,420,135
Members
130,645
Latest member
timberly75
 

 

 

Latest posts

Latest profile posts

Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
teklanika_ray wrote on MShort's profile.
I have quite a bit of 458 win mag brass, most of it new. How much are you looking for?

Ray H
bigrich wrote on Bob Nelson 35Whelen's profile.
hey bob , new on here. i specifically joined to enquire about a 444 you built on a Enfield 4-1 you built . who did the barrel and what was the twist and profile specs ? look foward to your reply . cheers
 
Top