Three Sisters

I am confident that both the DGS and DGX in any of these three bullets lack the penetration capability be it Texas Chipmunks or the Montana sub species. You're going to end up with a lot of fragmentation. Possibly a 500 grain or DGX could provide the weight and structure to penetrate the shoulder of either of these animals. Expect the probability of being faced with a lot of tracking. with a minimal blood trail.
 
Ok, pretty meaningless post, unless you are a geek like me.

Three 400gr Hornady bullets...three different diameters...

View attachment 202415


Tim: I think your logic is very sound and message is clear. When selecting between three sisters, select the tall, slender one.


Now you aren't really loading any pitiful Hornady bullets are you?

I recently read another sad performance report on Hornady DGX bullets. Two friends were hunting buff in Tanz. They came across a massive old daggaboy and the first guy fired a swift A-Frame into the front shoulder from about 75 yard. The buff took a couple of steps and the front legs collapsed. However, the back half of the buff was still standing, so the guy fired the other barrel, this one with a Woodleigh solid. The buff hit the ground with a thud and lie motionless. The two hunters watched it for a minute or two and the other guy decided he should put another shot in it, just to be sure. From 30 yards, he fired his Hornady DGX into the seemingly lifeless buff, which promptly got up and ran off, never to be seen again. This is proof that the Hornady DGX doesn't kill critters and will actually bring them back to life.
(Note: this must be true, because we're reading it on the internet) :whistle:
 
This is proof that the Hornady DGX doesn't kill critters and will actually bring them back to life.

Maybe we can dig up Reagan or Truman or (insert favorite dead President) and pop them with a DGX?
 
Tim: I think your logic is very sound and message is clear. When selecting between three sisters, select the tall, slender one.
Now that's funny, and clever!
 

Forum statistics

Threads
63,488
Messages
1,396,655
Members
124,386
Latest member
Evan401521
 

 

 

Latest profile posts

Speedster wrote on Sue Tidwell's profile.
Just received your book. It will be a Christmas present from my wife. Looking forward to read it.
ftothfadd wrote on EuroOptic's profile.
Jake, Sorry to bug you again. I was wondering if you could share a. couple actual pics of this crossbow with me?

Xpedition Archery USED Scrapeline390X Sniper Gray Crossbow XACW1001 - Light Wear - Needs Bolt/Arrow Guide Spring UA5689​

If it is in a decent shape, would you be willing to sell it for $100 shipped? IS it missing the retention spring that goes over the bolt?
Thank you Ferenc
Hie guys. Where can a 16 year old get a job at a hunting outfitter whilst the boy studies for lph . If anyone has anything WhatsApp me on [redacted]
Montana Gun Man wrote on John P.'s profile.
Good morning John, I just read your setup procedure for the northstar duplicator ator. I found it very hand and I did learn some things. I have the same machine and I am having a problem i can not figure out and was hoping you could shed some light on the subject.
steve white wrote on Todd Fall's profile.
I'll take the 375 bullets. I'm not a techie, so I can do USPS money order or Paypal?
My telephone is [redacted] Thanks, S.
 
Top