Purchased Another rifle I didn't know I needed, 7x64

Just an update. Now that winter is over i got out to do some shooting this morning.
Overall the 173gr S&B ammo i bought is much more accurate. Right at 1moa.
The only troubling thing is one case totally ruptured. I knew something was wrong immediately as I felt the gasses and then sticky bolt lift. Only this one cartridge a all the rest fired fine.
 

Attachments

  • 20250331_111439.jpg
    20250331_111439.jpg
    2.7 MB · Views: 60
  • 20250331_111458.jpg
    20250331_111458.jpg
    1.9 MB · Views: 71
Just an update. Now that winter is over i got out to do some shooting this morning.
Overall the 173gr S&B ammo i bought is much more accurate. Right at 1moa.
The only troubling thing is one case totally ruptured. I knew something was wrong immediately as I felt the gasses and then sticky bolt lift. Only this one cartridge a all the rest fired fine.

I have shot hundreds of those S&B 173 grain Torpedo rounds with zero problems... and they are accurate and great on game too.
 
Just an update. Now that winter is over i got out to do some shooting this morning.
Overall the 173gr S&B ammo i bought is much more accurate. Right at 1moa.
The only troubling thing is one case totally ruptured. I knew something was wrong immediately as I felt the gasses and then sticky bolt lift. Only this one cartridge a all the rest fired fine.
That looks like a bad case, it happens. I note though that the later stuff seems hotter than previous. I had one round of that show obvious pressure signs not long ago. I pulled one down, noted the charge then dumped a few grains out of some others of that box.
 
Just an update. Now that winter is over i got out to do some shooting this morning.
Overall the 173gr S&B ammo i bought is much more accurate. Right at 1moa.
The only troubling thing is one case totally ruptured. I knew something was wrong immediately as I felt the gasses and then sticky bolt lift. Only this one cartridge a all the rest fired fine.
Probably the result of the machine that stamps out brass disc's from the brass strip being run too quickly and getting out of time. If a cutting die takes a nick out of a disc that will happen. I only saw it twice at the range complex that I used to run.
 
Finally got to hunt with this rifle and absolutely love it. The 173gr load took down a roughly 250lb boar in Texas yesterday.

Super proud also of my 15yr of grandson.
3 Pigs and a coyote down in 4 shots. 2 Pigs 5 seconds apart.
He's using a Browning A bolt 30-06

I tried to post a picture of mine with the rifle. But after I touched it up to remove blood it says file not accepted.
It's the boar on the ground by itself anyway in these pictures
 

Attachments

  • 20250410_195816.jpg
    20250410_195816.jpg
    6.6 MB · Views: 53
  • 20250411_102431.jpg
    20250411_102431.jpg
    2.2 MB · Views: 43
  • 20250411_201712.jpg
    20250411_201712.jpg
    4.1 MB · Views: 48
  • 20250411_072848.jpg
    20250411_072848.jpg
    1.3 MB · Views: 74

Forum statistics

Threads
65,136
Messages
1,436,488
Members
134,561
Latest member
MatildaPan
 

 

 

Latest posts

Latest profile posts

TakeMeLord wrote on Hunt anything's profile.
Suppressor Question.. you shot a waterbuck, followed vapor trail.
May I ask: Brand of Suppressor? Caliber of rifle
AND
Dis airport secutity give you any hassles about the silencer? Thanks, Dale
RolandtheHeadless wrote on intj's profile.
Hi. Will you take $90 including shipping for the 28 Nosler brass?

Jim
Mauser3000 wrote on HBartley's profile.
Hello,

I saw your post selling left hand rifles. Do you have any additional pics of the .416 Rem mag?

Thank you.

-Nathan
Mauser3000 wrote on gbflyer's profile.
Hello, I saw your post selling left hand rifles. Do you have any other left hand rifles you may let go of? Also can you send a few additional pics of Borden rifle?

Thank you.

-Nathan
 
Top