on a lighter note...

FB_IMG_1689635289361.jpg
 
I strongly resent this meme....as it resembles the repair I made to my Ford truck...... resembles is the key word...as every mechanic knows to use 2 polyethylene nuts and a lock washer between the 2 nuts to insure proper torque to the U clamps so the U clamps don't vibrate loose and fall off in the road.

Ask me for other mechanic's tricks like spot welding, screwing up the threads/ cross threading, etc, etc, to keep bolts from coming loose.

Seriously...You fell for this....:ROFLMAO::ROFLMAO::ROFLMAO::E Rofl:

You don't use U bolts, you have to drill 3/8" SAE holes through all the leaf springs. It cuts the costs of buying all the extra nuts and lock washers. GEEZE!!!:E Rofl:
 
Don't know whether to laugh or like. The proper angle/slope allows for walking up. The fact the stairs are upside down makes me laugh at the idiots who installed it. However the upside down stairs does add some additional strength, to the hellofava slide coming down.:E Rofl:
 
Really......No bread comes out picture perfect like that in Texas heat.....45 minutes, BS!, the bread would be burnt/ charcoaled toast.
Even worse is without the melted butter, apple butter, various jams/jellies, but mostly fresh butter!!
 

Forum statistics

Threads
70,296
Messages
1,570,915
Members
169,049
Latest member
bustsizegelzapovecanjegrudi
 

 

 

Latest profile posts

autofire wrote on ThinAirHunter's profile.
I think forum prohibits making reference or giving personal references to PH/Outfitters that don't advertise on this forum.

But you can call me. I would be happy to discuss Cape Buffalo .

Bob 813-310-6992
MHYOUNG 375 wrote on Marley7x57's profile.
If you really are interested I 'll send some pix. I have quiet a few.
curt672 wrote on Robmill70's profile.
So What's the story on the 340 ??? thanks Curt
rdog wrote on Bob Nelson 35Whelen's profile.
Bob i was at Rebel gun works last Friday they had once fired 25/20 brass in their up stairs section , how are the knees going?
 
Top