Letting someone borrow your rifle and sighting in

I made a living for several years by gunsmithing, most of which was building and fitting stocks, installing optics, installing and regulating sights. At the same time, my business offered private and class instruction on handguns and rifles.

It's 100% bunk to say a rifle will produce a different POI based on the shooter. BUT, it's 100% fact different shoots will often not properly or IMPROPERLY sight in the same way, whether be it through a scope or iron sights. How many shooters have picked up another fellows rifle and immediately noticed the reticle in their scope was cock-eyed? The shooter likely never noticed - because it's level the way he holds it! Or how many times have you picked up a fellow shooters' rifle then struggled to fit an appropriate eye relief or appropriate cheek weld? That's a safe bet you won't be positioned relative to the sights or scope in the exact same way the original shooter. If you DO find that same spot, you'll shoot exactly the same as the owner, if you don't, you won't.

Recoil for hold is a different game, most shooters don't actually shoot well enough, especially offhand where it would matter most, such they'd notice a little extra movement. The differential in their movement during their trigger stroke USUALLY will make far more difference when on the bench, and a lack of offhand accuracy typically won't expose the dwell time recoil effect either.
 
I tend to sight in my two sons's rifles because I spend more time at the range than they do. I always insist they do final sight in and they're glad to do it. One son is a lefty. In every case I can't remember them having to adjust more than a click in either direction. Probably adjusting to remove any compensation for my trigger jerking lol ...
 

Forum statistics

Threads
64,684
Messages
1,424,513
Members
131,901
Latest member
ShirleenMu
 

 

 

Latest profile posts

gregrn43 wrote on samson7x's profile.
Are you on Arkansas hunting net to?
cwpayton wrote on LivingTheDream's profile.
HEY there, if you want the lion info here it is.

BULL CREEK OUTFITTERS WELLS NV. {FACEBOOK} CLEVE AND BECKY DWIRE 775293 -1917..
THEY ARE OUT HUNTING ALOT SO MAY HAVE TO LEAVE MESSAGE.


CAL PAYTON
cwpayton wrote on MontanaPat's profile.
Hi Montana Pat heres the lion info,.
BULL CREEK OUTFITTERS WELLS NV. [ FACEBOOK] CLEVE AND BECKY DWIRE 775- 293-1917. they are out hunting alot this tlme of year

Cal Payton
bigrich wrote on Bob Nelson 35Whelen's profile.
thanks for your reply bob , is it feasible to build a 444 on a P14/M17 , or is the no4 enfield easier to build? i know where i can buy a lothar walther barrel in 44, 1-38 twist , but i think with a barrel crown of .650" the profile is too light .
Duke1966 wrote on Flanders357's profile.
ok $120 plus shipping
 
Top