I need your help

@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
 
cant tell exactly from the OP's pic.. but based on the one pic and the bullet measurement, I'd guess .35 Whelen...

Here's a factory loaded federal .30-06 next to a re-sized and primed .35 Whelen made from re-sizing a federal 30-06 case (just pulled from my ammo locker)..

Looks pretty similar to the OP pic..



IMG_1943.jpg
 
Greetings Bob!

OH NO, … not another cool cat cartridge based off the Whelen - but, I will give it a dedicated search & does sound like a ‘real looker & fun’ project!
@Jaegger
Plenty of cool threads on this forum about the 400 Whelen.
Bob
 
@Jaegger
If you won't some real fun go the 400 Whelen petrov design.
Equals the 400/450 in an 06 case
Bob
"petrov design"? Anyway, I would go for the .400 Whelen AI in an '06 case. Might get a couple of grains more powder stuffed into it? LOL
 
Back in the '70s, I reloaded paper (actually cardboard) 12ga. shells before I transitioned to AA plastic hulls. You could load the cardboard hulls "hotter" (more powder and shot than the plastic hulls). Every once in a while, the brass base would separate from the cardboard hull upon firing. Not a big deal, but I would have to remove the barrel from my Remington 1100 to get out the hull from the chamber. It seemed to only happen with multiple reloading of the cardboard hulls. I've seen recently where Remington is making the paper hulls again.
Same for an old guy I shot skeet with around that time. He had been a factory shooter in prior years and had "a warehouse full" of paper hulls. Reloaded them just once and left them on the ground, IIRC.
 

Forum statistics

Threads
68,524
Messages
1,524,116
Members
154,128
Latest member
TashaSasak
 

 

 

Latest profile posts

Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
I have not posted any items for sale on this forum and will not every put anything for sale. My account was hacked and I've worked with the admin to get things shut down.
 
Top