Guide rifle recommendations

I’m a guide in the Lower 48 since 1991 and also in Alaska for brown bears since 2006. I believe you are overthinking this a bit.

For the polar bear hunts, take the 458 Winchester with bullets from 400 to 500 grains, such as Swift A-Frame or Barnes TSX.

For the moose, sheep, black bear, etc… take either the 9.3 or the 375 with 270 to 300 grain bullets.

Solids have no place up north. Bears are thin skinned. Good luck on your hunts!
 
I’m a guide in the Lower 48 since 1991 and also in Alaska for brown bears since 2006. I believe you are overthinking this a bit.

For the polar bear hunts, take the 458 Winchester with bullets from 400 to 500 grains, such as Swift A-Frame or Barnes TSX.

For the moose, sheep, black bear, etc… take either the 9.3 or the 375 with 270 to 300 grain bullets.

Solids have no place up north. Bears are thin skinned. Good luck on your hunts!
Definitely overthinking. Been in a remote work camp since mid November working nights shifts, dont have much to do but read things on the internet and overthink. Appreciate the advice! Same to you good luck hunting!
 
"Sounds as though you might know more than most already."

I second that. My vote would be for a 375 shooting factory 300g A-Frames. More than enough for anything in North America, shoots flat enough to take game at 300 yards as well.
 
Garret says you can shoot the hammerheads in the 1886, the Perdesoli handles them, and the ones that don't, it is just a small adjustment to the throat they require. It is probably just a meplat issue. The frontal area has got so large on currently popular bullets, they spread into the rifling on some throats.
Oh, and the 45-90, will for sure shoot the Hammerheads.
 

Forum statistics

Threads
70,267
Messages
1,568,145
Members
168,087
Latest member
Reda342824
 

 

 

Latest profile posts

aminkus wrote on RAVEN ROCKS PRECISION's profile.
hello, i am looking for 404 Jeffery Hydro Solids ?
thank you very much
MHYOUNG 375 wrote on Marley7x57's profile.
That is not an Echols rifle but a clone as it has the Echols stock and all the bells and whistles. Lon Paul who built the rifle does great work.
SStomcat wrote on Mark458's profile.
Mark - I think you have a CZ 404 Jeff in synthetic stock. Is this factory spec. or you switched the stock? thx
SS
migrabill wrote on nyrifleman's profile.
Thank you for responding to my post. You have a PRE 64 and it is still new in box???! I would need to see pics and a price please.
 
Top