Guide rifle recommendations

I’m a guide in the Lower 48 since 1991 and also in Alaska for brown bears since 2006. I believe you are overthinking this a bit.

For the polar bear hunts, take the 458 Winchester with bullets from 400 to 500 grains, such as Swift A-Frame or Barnes TSX.

For the moose, sheep, black bear, etc… take either the 9.3 or the 375 with 270 to 300 grain bullets.

Solids have no place up north. Bears are thin skinned. Good luck on your hunts!
 
I’m a guide in the Lower 48 since 1991 and also in Alaska for brown bears since 2006. I believe you are overthinking this a bit.

For the polar bear hunts, take the 458 Winchester with bullets from 400 to 500 grains, such as Swift A-Frame or Barnes TSX.

For the moose, sheep, black bear, etc… take either the 9.3 or the 375 with 270 to 300 grain bullets.

Solids have no place up north. Bears are thin skinned. Good luck on your hunts!
Definitely overthinking. Been in a remote work camp since mid November working nights shifts, dont have much to do but read things on the internet and overthink. Appreciate the advice! Same to you good luck hunting!
 
"Sounds as though you might know more than most already."

I second that. My vote would be for a 375 shooting factory 300g A-Frames. More than enough for anything in North America, shoots flat enough to take game at 300 yards as well.
 
Garret says you can shoot the hammerheads in the 1886, the Perdesoli handles them, and the ones that don't, it is just a small adjustment to the throat they require. It is probably just a meplat issue. The frontal area has got so large on currently popular bullets, they spread into the rifling on some throats.
Oh, and the 45-90, will for sure shoot the Hammerheads.
 

Forum statistics

Threads
68,659
Messages
1,527,749
Members
155,885
Latest member
RaquelMont
 

 

 

Latest posts

Latest profile posts

buckstix wrote on 450 Dakota's profile.
SENT THIS PM YESTERDAY ..

I will take a set .. I would take more than one set if you have more.

BUCK STIX - [redacted]
Redfishga1 wrote on Steve D's profile.
ill take both of the 375 woodleigh hydros
AfricaRob wrote on Luminous Ham's profile.
See you are from Denmark - see quite a few Danes where I stalk in Scotland - great hunters.
The Harkilia stuff works well in Africa - I have a bit for use here in UK.
I am again looking for 600 Nitro dies preferably RCBS 1 inch. The set I purchased previously are 1 1/2 inch and do not fit my die. Another member has graciously taken them off my hands. If anyone happens to have a set of 600 Nitro Dies that will fit my Rockchucker Supreme RCBS press, please shoot me a message and thanks in advance for any assistance you may have to offer!
 
Top