Another CZ!

image.jpg
image.jpg
I just picked up the rifle on Friday and graduated college Saturday so I didn't get a chance to post pics of the gun this weekend. Here she is though, I'm very impressed and happy with this rifle and can't wait to shoot it!! I was pleasantly surprised to see that cz included a set of rings for it as well! Hopefully next week I'll have a scope for it and will have a range report for everyone!
Thanks,
Voodoo
 
It's a Dandy
 
Congrats on your new rifle! I have a 1.5-5x on my 500 Jeffery and my son's 416 Rem. We have a 2-7x on our 375 Weatherby but if I had to do it over again, I'd put the 1.5-5x on it too. I've taken more than a few mule deer and elk out to just past 400 yards with a 270 and a 2-7x Leupold and never had it off 2x except at the range.
 
Congrats, I passed on a new one for $600 a few years back, no regrets at this point! I bought a different 9.3x62 in the end
 
my 9.3 wears a VX3 2.5-8X36

I am very fond of these scopes for most of my rifles.
 
all that wood suits that rifle voodoo
congratulations, on both the riffle and college ,mate..........
 
You should like that rifle a lot. If you handload and need a place to start with easily available components, start with some 270gr Speer's and IMR4350. I have used this combo in several 9.3's and it always shoots well. I have had the most consistent luck with IMR4064 and 250gr bullets by Nosler, either Accubond or Ballistic Tip when you can find them. For 286gr bullets I like about 59grs of R15 for around 2300fps. Good luck!
 
Thanks Bluey! It's looking like it be a great rifle, I was finally able to dial in the iron sights and it shot well at 25yds. Fortunately a local gunshop has a great stock of Privi partisan ammo for sighting in and plinking purposes. At only $27 a box I'm pretty happy until I get all my reloading components. I've got some Barnes tsx's that I'm looking to use as my hunting load.
 

Forum statistics

Threads
66,647
Messages
1,475,111
Members
141,564
Latest member
FelishaMcg
 

 

 

Latest posts

Latest profile posts

7x57Joe wrote on HunterX's profile.
How much is your friend asking for his M-S 8x56? Thanks
David jr wrote on Green Chile's profile.
Hello I am wanting the same thing done on a elephant in 2027 please keep me informed on how it is going
Is the 6 panels the whole elephant of just half
David Williams
Shotgun Coach wrote on Tdruck's profile.
In the RSA
Turner024 wrote on JG26Irish_2's profile.
Would you be willing to talk sometime about your experience with RDB? More so what you would recommened taking. I will be going in May.
 
Top