Another CZ!

image.jpg
image.jpg
I just picked up the rifle on Friday and graduated college Saturday so I didn't get a chance to post pics of the gun this weekend. Here she is though, I'm very impressed and happy with this rifle and can't wait to shoot it!! I was pleasantly surprised to see that cz included a set of rings for it as well! Hopefully next week I'll have a scope for it and will have a range report for everyone!
Thanks,
Voodoo
 
It's a Dandy
 
Congrats on your new rifle! I have a 1.5-5x on my 500 Jeffery and my son's 416 Rem. We have a 2-7x on our 375 Weatherby but if I had to do it over again, I'd put the 1.5-5x on it too. I've taken more than a few mule deer and elk out to just past 400 yards with a 270 and a 2-7x Leupold and never had it off 2x except at the range.
 
Congrats, I passed on a new one for $600 a few years back, no regrets at this point! I bought a different 9.3x62 in the end
 
my 9.3 wears a VX3 2.5-8X36

I am very fond of these scopes for most of my rifles.
 
all that wood suits that rifle voodoo
congratulations, on both the riffle and college ,mate..........
 
You should like that rifle a lot. If you handload and need a place to start with easily available components, start with some 270gr Speer's and IMR4350. I have used this combo in several 9.3's and it always shoots well. I have had the most consistent luck with IMR4064 and 250gr bullets by Nosler, either Accubond or Ballistic Tip when you can find them. For 286gr bullets I like about 59grs of R15 for around 2300fps. Good luck!
 
Thanks Bluey! It's looking like it be a great rifle, I was finally able to dial in the iron sights and it shot well at 25yds. Fortunately a local gunshop has a great stock of Privi partisan ammo for sighting in and plinking purposes. At only $27 a box I'm pretty happy until I get all my reloading components. I've got some Barnes tsx's that I'm looking to use as my hunting load.
 

Forum statistics

Threads
65,770
Messages
1,453,217
Members
138,136
Latest member
ImogeneAnn
 

 

 

Latest posts

Latest profile posts

teklanika_ray wrote on USMA84DAB's profile.
X
tarbe wrote on DAVE LANGERMAN Safaris's profile.
Dave - Kathy ad I hope to see you Friday at DSC!

Tim Arbeiter
doctari505 wrote on PaulB's profile.
Hi PaulB. Would you be interested in another WJ Jeffery .450/.400 NE 3". It's an extractor model and in superb condition, cased as well. Made in 1908. The rifle is here in Texas.
migrabill wrote on eswan68587's profile.
I will take the knife for $250 shipped. Please tell me how you would like the payment.

Thanks-
[redacted]
 
Top