350gr swift A frames

I have shot 450 TSX out of my 458Lott, a 350 would be in the upper 2500 to low 2600.

Having used the AFrame line, I would ask Swift what their thoughts are. If they will open up at that speed, you should not have many problems. Just be aware, the 350s will not have a hi SD. Something to consider.
 
I have shot 450 TSX out of my 458Lott, a 350 would be in the upper 2500 to low 2600.

Having used the AFrame line, I would ask Swift what their thoughts are. If they will open up at that speed, you should not have many problems. Just be aware, the 350s will not have a hi SD. Something to consider.
True. Not a thick skinned DG bullet but that is what Swift’s factory 45-70 load is loaded with so it should perform well. Different design than the standard a frame
 
No, but it should be a heck of a short range, <150yd, PG bullet. I’ve used the 350gr Hornady on deer and hogs: devastating. I worked up a load for a 350gr Barnes TSX, but testing didn’t show good expansion. Velocity was ~2100fps from a Ruger #3. Used H4198.
 
This is one I recovered in water jugs. At 50yds it went through 7 1gal milk jugs full of water, only lost 1gr. I feel like it would make a decent DG bullet, certainly wouldn't be the worst choice

20220406_141457.jpg
20220406_141459.jpg
 
Last edited by a moderator:
This is one I recovered in water jugs. At 50yds it went through 7 1gal milk jugs full of water, only lost 1gr. I feel like it would make a decent DG bullet, certainly wouldn't be the worst choice

View attachment 494332View attachment 494333
Something to consider, in testing 300 BLK Hornady Sub X for expansion, I found that 2 liter soda bottles were better at stopping bullets than milk jugs. Five milk jugs through and through was stopped in four 2 liter bottles.
 
I shoot 350 grain .458 bullets in a couple of my rifles and they killed all they hit.
These were North Fork bullets and none were recovered - all shoot throughs.
I do not waste NF bullets on milk jugs and such.
 
i have not used the 350 swifts, i suspect they will work just fine tho. is it a flat point? i used the kodiak bullet company's 350 gr bonded at 2150 fps. i suspect they would kill anything i wanted to shoot with a soft. as @crs noted, north fork bullets are awesome as well.
 
1Dirthawker,
+1 on the Kodiak bullets. Our bullet testing team used them & NF in Africa -- both 450 grain solids shot through ele heads and into body -- DRT! Soft points were good on Cape buff.
 
i have not used the 350 swifts, i suspect they will work just fine tho. is it a flat point? i used the kodiak bullet company's 350 gr bonded at 2150 fps. i suspect they would kill anything i wanted to shoot with a soft. as @crs noted, north fork bullets are awesome as well.
They are a flat point
 
as stated before, i suspect they will work just fine. was merely concerned about magazine issues, (detonation)
 

Forum statistics

Threads
69,813
Messages
1,557,343
Members
165,315
Latest member
AmadoEnnis
 

 

 

Latest posts

Latest profile posts

I broke my cherry, August 2026, 41" Cape, hooked for life.
Member of the South African Hunters and Game Conservation Association
supergrizzly wrote on AZDAVE's profile.
Dave, I could use both of them if still available. I just picked up a new .22 mag and a .22 pump that they would be perfect on.
Andrew NOLA wrote on Huntforever's profile.
Lbarr might be a scammer

it appears he sold the same brass to me and another member
 
Top